home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Cream of the Crop 3
/
Cream of the Crop 3.iso
/
comm
/
mycmm220.zip
/
MYCOMM.DOC
< prev
next >
Wrap
Text File
|
1994-03-29
|
202KB
|
4,708 lines
MyComm Version 2.20
Unregistered Version Documentation
Printed March 29, 1994
Copyright (c) 1992 - 1994 - Ken Dorshimer
All Rights Reserved
MyComm is NOT Public Domain or free software. The MyComm
software, support files, and documentation are Copyright (c) 1992
- 1994 Ken Dorshimer, all rights reserved.
MyComm is being marketed under the "Shareware" concept. You
may use MyComm for a 30 day evaluation period to determine its
usefulness in your particular application. After the 30 day
evaluation period you must register MyComm if you continue to use
it.
Registration is as follows:
Send $25 (twenty five U.S. dollars drawn on a U.S. bank),
plus $2 shipping and handling to:
Ken Dorshimer
P.O. Box 5143
Belmont, Ca. 94002
(Please send check or money order, do not send cash. People
who want to order MyComm from outside the U.S. should obtain a
money order in U.S. dollars from a local bank.)
For your convenience there is a file called ORDER.FRM which is
an order form for MyComm. An order form is also included in
Appendix F of this documentation. Please note that if you
downloaded MyComm from a BBS that charges a subscription fee,
obtained a copy of MyComm from a "shareware disk copying"
service, or CD ROM library the registration fee for MyComm is not
paid for or collected by those services!
1.0 Introduction to MyComm 1
1.1 Registration and Licensing 2
1.2 Disclaimer and Warranty 5
1.3 Definitions, Acronyms 5
1.4 General System Requirements 6
1.5 MyComm Files 7
1.6 MyComm Support and Technical Assistance 7
2.0 MyComm Installation 8
2.1 System Requirements 8
2.2 MyComm Installation Instructions 9
2.3 Running MyComm 11
2.4 Command Line Parameters 12
2.4.1 Join Script 12
2.4.2 Dial Entries (Registered version only) 12
2.4.3 Timed Start (Registered version only) 13
3.0 MyComm Screens and Menus 13
3.1 Terminal Screen 14
3.2 Help Menu - F1 15
3.3 Chat Mode - Alt A 15
3.4 Send Break - Alt B 16
3.5 Clear the Screen - Alt C 16
3.6 Dialing Functions - Alt D 16
3.6.1 Add Phone List Item 17
3.6.2 Edit Phone List Item Screen 17
3.6.2.1 Name 18
3.6.2.2 Number 18
3.6.2.3 Baud Rate 18
3.6.2.4 Data Bits 19
3.6.2.5 Data Parity 19
3.6.2.6 Stop Bits 19
3.6.2.7 Default Protocol 19
3.6.2.8 Dial Prefix 19
3.6.2.9 Logon Name 20
3.6.2.10 Password 20
3.6.2.11 Terminal Type 20
3.6.2.12 Local Echo 21
3.6.2.13 Received BS (BackSpace) Destructive 21
3.6.2.14 BS Key Sends BS or DELete 21
3.6.2.15 Strip Hi Bits 21
3.6.2.16 Add LF after incoming CR 22
3.6.2.17 Clear last date called 22
3.6.2.18 Script 22
3.6.2.19 Save Changes 22
3.6.3 Delete an Item 22
3.6.4 Call Numbers (Dial) 22
3.6.5 Phone Item Info Screen 23
3.6.6 Manual Dial Screen 24
3.6.7 Mark Phone List Items 24
3.6.8 Find Phone List Items 25
3.6.9 Load Phone List Screen 25
3.6.10 Sort Phone List 25
3.6.11 Move Phone List Item 25
3.6.12 Print Phone List 26
i
3.7 Local Echo On/Off - Alt E 26
3.8 Hang Up Modem - Alt H 26
3.9 Send Modem Initialization Strings - Alt I 26
3.10 Join Script - Alt J 27
3.11 Present Line Status - Alt L 27
3.12 Scroll Back - Alt K 28
3.13 Manual Dial - Alt M 28
3.14 Outside to DOS - Alt O 28
3.14 Change Port Parameters - Alt P 29
3.16 Quick Re-Dial - Alt Q 29
3.17 Run External Program - Alt R 29
3.18 Session Capture On/Off/Pause - Alt S 30
3.19 Terminal Emulation - Alt T 30
3.20 Update Configuration - Alt U 30
3.20.1 Modem Setup Screen 31
3.20.1.1 COM Port 32
3.20.1.2 Modem Initialization String 32
3.20.1.3 Modem Attention String 33
3.20.1.4 Modem Hang Up String 33
3.20.1.5 Modem Answer String 33
3.20.1.6 Modem Cancel Dial String 33
3.20.1.7 Modem Dial Suffix String 33
3.20.1.8 Dialing Wait Time 34
3.20.1.9 Pause Between Calls 34
3.20.1.10 Local Echo on by Default 34
3.20.1.11 Use DTR to Hang Up Modem 34
3.20.1.12 Use XON/XOFF Flow Control 35
3.20.1.13 Use CTS/RTS Flow Control 35
3.20.1.14 Use DSR/DTR Flow Control 35
3.20.1.15 Dialing Prefixes 35
3.20.1.16 Connect Strings 36
3.20.2 Paths Setup 36
3.20.2.1 Download Directory 37
3.20.2.2 Upload Directory 37
3.20.2.3 Path\File for Screen Capture 37
3.20.2.4 Session Capture Path\File 37
3.20.2.5 Phone File Path\File 38
3.20.2.6 Editor Path\Filename 38
3.20.2.7 External Programs Path\Filename 38
3.20.3 Protocols Setup 38
3.20.3.1 ASCII Transfers Setup 38
3.20.3.1.1 Strip High Bits 39
3.20.3.1.2 Remote Abort Char 39
3.20.3.1.3 CR Translation 39
3.20.3.1.4 LF Translation 40
3.20.3.1.5 Local Echo On During Uploads 40
3.20.3.1.6 Expand Blank Lines to Spaces 40
3.20.3.1.7 Line Pace Time 40
3.20.3.1.8 Character Pace Time 40
3.20.3.1.9 Pacing Char 41
3.20.3.2 Zmodem Transfers Setup 41
3.20.3.2.1 Zmodem 32 Bit CRC 41
3.20.3.2.2 Zmodem Auto Download Feature 41
3.20.3.2.3 Zmodem Send Crash Recovery 41
ii
3.20.3.2.4 Zmodem Receive Crash Recovery 42
3.20.3.4 Kermit Transfers Setup 42
3.20.3.4 External Protocols Setup 43
3.20.4 Miscellaneous Options Setup 44
3.20.4.1 Screen Background Color 45
3.20.4.2 Screen Text Color 45
3.20.4.3 Date Format Style 45
3.20.4.4 12 or 24 Hour Time Format 45
3.20.4.5 Make Noise When Calls Connect 46
3.20.4.6 Make Noise After File Transfers 46
3.20.4.7 Use Direct Video 46
3.20.4.8 Your Name for sign on 46
3.20.4.9 Password for sign on 46
3.20.4.10 Clever quip for TagLine 47
3.20.4.11 Guess Up/Download Filename 47
3.20.5 COM Port Addresses 47
3.20.6 Restore to Defaults 48
3.20.7 Save Setup 48
3.21 Send Screen to File - Alt W 48
3.22 Exit MyComm - Alt X 48
3.23 Help Screen - F1 48
3.24 Send Name - F2 49
3.25 Send Password - F3 49
3.26 Send Tagline - F4 49
3.27 Transferring Files 49
3.27.1 Starting a File Transfer 50
3.27.2 File Transfer Hints 53
3.27.3 Download Files - PgDn 53
3.27.4 UpLoad Files - PgUp 53
3.27.5 ASCII File Transfers 53
3.27.6 SEAlink Derived File Transfers 54
3.27.7 Xmodem File Transfers 54
3.27.8 1K-Xmodem File Transfers 54
3.27.9 Ymodem Batch File Transfers 55
3.27.10 Ymodem-G Batch File Transfers 55
3.27.11 Zmodem File Transfers 55
3.27.12 Kermit File Transfers 56
3.27.13 External Protocol File Transfers 56
3.27.14 MyComm as a Host 56
Appendix A - MyComm Command Summary 58
Appendix B - MyComm Line Editing Functions 59
Appendix C - Terminal Emulation 60
TTY Terminal Emulation 60
ANSI Terminal Emulation 60
VT-52 and VT-100 Terminal Emulation 61
3270 Terminal Emulation (Registered version only) 62
Appendix D - Troubleshooting 63
Appendix E - MyComm Script Language 66
1.0 Script Language Introduction 66
1.2 Creating a Script 66
2.0 Script Language 67
2.1 Special Script Characters 68
2.2 Script Functions 68
2.2.1 Labels 68
iii
2.2.2 WAITFOR() 69
2.2.3 XMIT() 69
2.2.4 GOTO() 69
2.2.5 SETFLAG() 69
2.2.6 INCFLAG() 70
2.2.7 DECFLAG() 70
2.2.8 IFFLAG() 70
2.2.9 IFSCAN() 70
2.2.10 SENDNAME() 71
2.2.11 SENDPASS() 71
2.2.12 SENDFILE() 71
2.2.13 RECVFILE() 72
2.2.14 SNDBREAK() 73
2.2.15 ALARM() 73
2.2.16 PAUSE() 73
2.2.17 HANGUP() 73
2.2.18 IGNORECD() 73
2.2.19 SETSTR() 74
2.2.20 GOSUB() 74
2.2.21 RETURN() 74
2.2.22 EXIT() 74
2.2.23 QUIT() 75
2.2.24 COMPSTR() 75
2.2.25 LOCLECHO() 75
2.2.26 IF() 75
2.2.27 PORTGET() 76
2.2.28 DIAL() 76
2.2.29 CHDIR() 76
2.2.30 RUNDOS() 76
2.2.31 FILEHERE() 76
2.2.32 JUMPSCP() 76
2.2.33 CONSGET() and CONSMGET() 76
2.2.34 CONSLOC() 76
2.2.35 CONSCLR() 76
2.2.36 CONSMSG() 76
2.2.37 KBDFLSH() 76
2.2.38 PORTFLSH() 76
2.2.39 SESCAP() 76
3.0 Script Syntax Checker 77
4.0 Script Sample 78
Appendix F - MyComm Order Form 79
Appendix G - MyComm Bug Report Form 80
Appendix H - Planned Modifications and Upgrades 81
Appendix I - MyComm Revision History 82
Appendix J - Control Characters 83
iv
MyComm Version 2.20 Documentation Page 1
1.0 Introduction to MyComm
MyComm is a small, yet powerful, data communications program
designed to enable users to access public bulletin board systems
(BBS's) and other telecommunication services. MyComm is designed
to run under the PC/MS-DOS operating system using DOS version 3.3
or higher. MyComm has a variety of built in file transfer
protocols including Zmodem, Xmodem, Xmodem-1K, Ymodem Batch,
Ymodem-G Batch, SEAlink, Kermit, and of course ASCII. There are
also slots to install up to six external file transfer protocols.
The driving principle behind MyComm is to provide a reliable,
powerful, and versatile communications package which is easy to
use, and small in size. Great care has been taken to optimize
MyComm for operating speed and to keep the executable code size
small so that it takes up less of your valuable disk space.
MyComm is designed to be easy to use for both novice and
experienced users, and employs a menu system that is friendly and
simple to navigate through.
MyComm features include:
■ A full featured communications package which is small in
size.
■ Wide variety of popular file transfer protocols.
■ Powerful, yet easy to use "script" language.
■ Small code size which will run with approximately 200K of
RAM.
■ Intelligent ANSI character translation which filters out
potentially harmful ANSI keyboard re-mapping sequences.
■ Intelligent DOS shell function that brings you back to the
disk drive and directory that you started from when you
return to MyComm.
■ Detection and use of the 16550 UART and FIFO buffers.
■ Locates program and configuration files no matter what
directory MyComm is started from (DOS 3.0 or greater).
■ Support for COM ports 1 through 8.
■ Simple, and easy to use. Some may even call it "fun"!
MyComm Version 2.20 Documentation Page 2
1.1 Registration and Licensing
MyComm is NOT Public Domain or free software. The MyComm
software, support files, and documentation are Copyright (c) 1992
- 1994 Ken Dorshimer, all rights reserved.
MyComm is being marketed under the "Shareware" concept. You
may use MyComm for a 30 day evaluation period to determine its
usefulness in your particular application. After the 30 day
evaluation period you must register MyComm if you decide to
continue to use it.
Registration is as follows:
Send $25 (twenty five U.S. dollars drawn on a U.S. bank),
plus $2 shipping and handling to:
Ken Dorshimer
P.O. Box 5143
Belmont, Ca. 94002
(Please send check or money order, do not send cash. People
who want to order MyComm from outside the U.S. should obtain a
money order in U.S. dollars from a local bank.)
For your convenience there is a file called ORDER.FRM which is
an order form for MyComm. The order form is also included in
Appendix F of this document. Please note that if you downloaded
MyComm from a BBS that charges a subscription fee, obtained a
copy of MyComm from a "shareware disk copying" service, or CD ROM
library the registration fee for MyComm is not paid for or
collected by those services!
MyComm represents many, many hours of work on my part in
research, design, coding, testing, revisions, enhancements and
writing the documentation. Writing a piece of software like
MyComm is not trivial. Your registration not only gives me the
incentive to continue producing and upgrading shareware products
like this one, but it is the right thing to do.
Let's face it. $25 is not a lot to spend on a program that
does everything MyComm does. Comparable communications packages
are generally much more expensive. The Shareware market is an
"all risk" venture for the author, while the user has everything
to gain. Your registration tells me that MyComm was worth
creating, and that people like it. I like to know that people
appreciate the effort I put into a project, don't we all? Enjoy
using the MyComm software, and I'm looking forward to hearing
from you.
MyComm Version 2.20 Documentation Page 3
When you register MyComm I will send you the most recent
version of MyComm and its documentation on floppy disk (standard
3.5" or 5.25" disk, 3.5" preferred). At this time I am not
offering a printed manual in order to keep the cost of the
software reasonable. Registered users will also be offered a
discount on future upgrades. Please bear in mind that the
registered versions have the latest revisions and enhancements
(another registration incentive).
Multiple registrations to the same individual or site will be
discounted as follows:
1 to 5 copies - no discount
6 to 10 copies - 5% discount
11 to 25 copies - 10% discount
26 to 50 copies - 20% discount
51 to 100 copies - 30% discount
over 100 copies - inquire for quote
Inquiries for site licenses and multiple registrations of
MyComm should be directed to the above address, or via Compuserve
(Tm) 73113,3536. In the case of site licenses and multiple
registrations a maximum of five (5) diskettes will be sent with
the order unless otherwise negotiated.
Registered users will be granted license to use the MyComm
software as they deem fit and within the law. The registered
version of MyComm may be duplicated for backup purposes only.
MyComm is not to be used on more than one computer at a time.
However registered users may install MyComm on their computer at
work and their computer at home providing that the two computers
are not operated simultaneously.
Businesses, corporations, organizations, government agencies,
or schools who intend to use MyComm on more than one computer at
a time must contact me for a site license. The registration of
an individual copy of MyComm is not to be construed a site
license (let's be serious). Feel free to contact me regarding
multiple registrations and site licenses.
MyComm Version 2.20 Documentation Page 4
All users are granted a limited license to make copies of the
unregistered "shareware" version of MyComm for the purpose of
allowing others to try it out, and the unregistered version may
also be uploaded to public bulletin board systems subject to the
above restrictions as well as the following:
■ MyComm must be distributed in completely unmodified
form, including all support files and documentation.
■ MyComm may not be included or bundled with any other
product for any reason without a license from the
author, Ken Dorshimer.
■ No charge or payment may be levied or accepted for the
MyComm software except by the author, Ken Dorshimer.
MyComm may not be sold or distributed through a third party
(this includes copying services and shareware distribution
outlets which distribute software for a copying fee) without the
expressed written permission of the author, Ken Dorshimer.
Shareware distribution services and bulletin boards which charge
a fee for software distribution should contact me for written
permission to distribute MyComm.
The MyComm executable file(s) and documentation, both the
"registered" and "unregistered" versions are copyrighted material
and may not be modified or reverse engineered in any manner. If
you require modified or customized versions of MyComm for
whatever reason feel free to contact the author at the address
above.
MyComm Version 2.20 Documentation Page 5
1.2 Disclaimer and Warranty
Disclaimer and Warranty:
MyComm was designed and coded on a best efforts basis in
accordance with the standard of care usually and reasonably
expected in the performance of such computer software.
THIS SOFTWARE AND DOCUMENTATION IS PROVIDED "AS IS". THE
AUTHOR, KEN DORSHIMER, MAKES NO WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR THE SOFTWARE'S USEFULNESS IN A PARTICULAR APPLICATION. IN NO
EVENT SHALL THE AUTHOR, KEN DORSHIMER, BE LIABLE FOR ANY DAMAGES
(INCLUDING DAMAGES FOR LOSS OF BUSINESS OR PERSONAL PROFITS,
BUSINESS OR PERSONAL INTERRUPTION, LOSS OF BUSINESS OR PERSONAL
INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF
OR INABILITY TO USE THIS PROGRAM, EVEN IF THE AUTHOR, KEN
DORSHIMER, HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
THE USER ASSUMES FULL RESPONSIBILITY AND LIABILITY FOR THE PROPER
USE OF THE MYCOMM SOFTWARE AND ACCOMPANYING DOCUMENTATION.
<Whew>, glad the legal stuff is out of the way. If I hadn't
included that my attorney would have me drawn and quartered.
1.3 Definitions, Acronyms, Acknowledgements, and Abbreviations
■ BBS - Bulletin Board System
■ IBM - Trademark, International Business Machines
■ Hayes - Hayes (trademark) compatible modems have
become the defacto standard in modem
communications. The Hayes command set are
modem commands preceded by "AT"
■ DOS - Disk Operating System
■ MS-DOS - Microsoft Disk Operating System, trademark of
Microsoft Corporation.
■ Shareware - A marketing system where users are allowed to
evaluate software before purchase and
registration.
■ XMODEM - A file transfer protocol developed by Ward
Christensen in the summer of 1977.
■ YMODEM - A file transfer protocol based on XMODEM
developed by Chuck Forsberg.
MyComm Version 2.20 Documentation Page 6
■ ZMODEM - A file transfer protocol developed by Chuck
Forsberg/Omen Technology, Inc.
■ SEAlink - A file transfer protocol based on XMODEM
developed by System Enhancement Associates,
Inc. Copyright 1986, 1987 by System
Enhancement Associates, Inc.
■ Kermit - A file transfer protocol developed by
Columbia University, New York, NY.
■ WordStar - Trademark (company unknown) of an editor
which has been around since the early days of
personal computers.
■ Unix - Trademark of operating system designed by
Bell Labs/Western Electric.
■ VT-nnn - As in VT-52, VT-100, etc. are trademarks of
the Digital Equipment Corporation.
■ 3270 - 3270 and 7171 are designations used by IBM
for terminal emulation and protocol
conversion respectively.
Any other names, trademarks, etc. not mentioned here belong to
whomever they belong to. If there are errors or omissions, and
you let me know, I will make an effort to correct them in the
next version of this documentation.
1.4 General System Requirements
MyComm is designed to run under the PC/MS-DOS operating system.
MyComm may be run either from a hard drive or a floppy drive,
although a floppy drive is not recommended when performing file
transfers (just too slow). Great care has been taken to keep the
code size small so MyComm will run with as little as 200K of main
memory (RAM) available. MyComm will run using a Monochrome
Graphics Adapter (MGA), a true Hercules (Tm) monochrome card,
EGA, and VGA.
MyComm is designed to use modems which use the Hayes (Tm) "AT"
command set. Your modem should support this standard or a subset
of it. MyComm supports modem speeds of 300, 1200, 2400, 4800,
9600, 19200, 38400, 57600, and 115200 baud and a wide variety of
data bit, parity bit, and stop bit settings.
MyComm Version 2.20 Documentation Page 7
1.5 MyComm Files
The files included in the MyComm package are:
■ MYCOMM.EXE - MyComm main executable program.
■ MYCOMM.DOC - Documentation for MyComm (you're reading
it now).
■ ORDER.FRM - Order form for MyComm.
■ BUGRPT.FRM - Form to describe any problems or
bugs you may have found, or to make
suggestions for future versions of
MyComm.
■ SCP_CHK.EXE - Program to check the syntax of script
file commands. See Appendix-E "MyComm
Script Language" for more information.
■ *.SCP - Example MyComm "script" language files.
MyComm also creates and modifies the following files as part of
its normal operation:
■ MYCOMM.CFG - MyComm configuration file.
■ MYCOMM.PHN - MyComm phone list file.
■ MYCOMM.OLD - Backup of the MyComm phone list file.
■ MYCOMM.SCR - File created when you capture the screen
to a file (see Alt W).
■ MYCOMM.SES - File created when capturing your current
session to a file (see Alt S).
■ Other Files - phone lists that you create, script
files, and any files that were
downloaded.
1.6 MyComm Support and Technical Assistance
MyComm technical assistance is offered in the following ways:
■ Contact the author through Compuserve at 73113,3536
(preferred method)
■ Write to:
P.O. Box 5143
Belmont, Ca. 94002
MyComm Version 2.20 Documentation Page 8
2.0 MyComm Installation
MyComm is amazingly simple to install and use. That's the
whole idea! The instructions in this section will have you up
and running in no time. Pay special attention to the information
that should be in your CONFIG.SYS file, and the stuff about the
COM ports.
2.1 System Requirements
MyComm is designed to run on IBM or compatible personal
computers under the MS-DOS operating system. Machines may be of
the PC, XT, AT, 386 or above class of personal computers.
MyComm has the following system requirements:
■ at least 200K of free memory (RAM).
■ MS-DOS version 3.0 or greater or similar "after market"
Disk Operating System.
■ Hayes compatible modem which accepts the " AT " command
set.
■ Your CONFIG.SYS file should contain the statements:
Device=ANSI.SYS
Files=40
Buffers=40
If your CONFIG.SYS file does not contain these
statements then you will need to modify the CONFIG.SYS
file. The CONFIG.SYS file may be edited with an
ordinary text editor. Simply type in a line that reads
"Device=ANSI.SYS", "Files=40", and one that reads
"Buffers=40" (without the quotes) and save the file.
Refer to your DOS manual if you need more information
on CONFIG.SYS.
MyComm Version 2.20 Documentation Page 9
2.2 MyComm Installation Instructions
Before you start the MyComm installation you should know which
COM port your modem is set for. Consult your modem manual if
you're not sure. Modems vary too much from one manufacturer to
another to describe every difference in this manual.
Step 1: Modify your CONFIG.SYS file to make any of the required
changes described in section 2.1 above.
Step 2: Create a directory on your hard drive (or a floppy
drive) called "MYCOMM" and change directory into the
new "MYCOMM" directory.
Example:
C:
CD\
MD MYCOMM
CD MYCOMM
Step 3: Copy the MYCOMM files into this new directory.
Step 4: Run MyComm. At the DOS command prompt type "MYCOMM"
then press the <Enter> key.
Step 5: MyComm will start to load. The first time MyComm is
run it will tell you that it can't find the
"Configuration File". It will then create a new
configuration file called MYCOMM.CFG. MyComm will also
create an empty phone dialing list called MYCOMM.PHN.
Step 6: MyComm has a default COM port setting of COM Port 1.
If your modem is set up for COM 1 already, don't sweat
it. Otherwise, MyComm will prompt you for the serial
port to use. Choose the COM Port that your modem is
set on. MyComm will then try to initialize the COM
Port. If all goes well you should see the letters "OK"
on the screen under the copyright notice. If the modem
doesn't appear to be responding, try repeating Step 6
using another COM Port (if you have more than one) or
see Appendix D "Troubleshooting".
You can see if the modem is responding correctly by
typing "AT" (without the quotes) and then press
<Enter>. The modem should respond with "OK". You may
test the phone line connection by typing "ATM1DT"
(again, without the quotes) then press <Enter>. This
command tells the modem to turn its' speaker on, then
dial nothing. You should hear a dial tone from the
modem speaker. Press <Enter> again and the dial tone
MyComm Version 2.20 Documentation Page 10
should stop and the modem should respond with "NO
CARRIER".
Step 7: Press the <Alt> and "U" key. This will bring up
MyComm's Update Configuration Menu. Go through each of
the menu options and make any changes required. The
remainder of this documentation describes each of the
MyComm options and functions.
Step 8: You will also need to modify the "Modem Initialization
String". This is done in the "Modem Setup" screen.
MyComm needs to see text response codes from the modem
rather than numeric codes. The general purpose
initialization string that MyComm uses as by default
is:
AT M1 X4 Q0 V1 S0=0 S11=50 S7=50 &C1 &D2^M
Broken down this means:
AT - "Hi modem! I'm sending you commands now".
M1 - Turn on modem speaker (M0 turns it off).
X4 - Select highest level of responses.
Q0 - Always send responses.
V1 - Send text responses.
S0=0 - Do not answer the phone.
S11=50 - Use fast dialing speed.
S7=50 - Wait time for Carrier Detect in seconds.
&C1 - Keep Carrier Detect (CD) low until a
connection is made.
&D2 - Use RTS/CTS flow control (important on
high speed modems).
^M - Send Carriage Return character (MyComm
internal command - see also Appendix J).
MyComm Version 2.20 Documentation Page 11
2.3 Running MyComm
Section 3 of this document covers all the options and functions
that MyComm offers. There are some additional items that should
be covered first.
MyComm may be started in a number of ways. Below are three
different methods to start the MyComm program.
Method 1: Start MyComm from the directory that you installed
MyComm in. For example:
CD\MYCOMM
then type "MYCOMM" and press the <Enter> key. This
will start the MyComm program.
Method 2: MyComm will also load from any directory if you have
set a "Path" with the DOS path command that points to
the directory MyComm lives in. For example to set the
path type:
PATH=C:\MYCOMM
providing of course that you installed MyComm in the
directory C:\MYCOMM. Just substitute the appropriate
path in that case.
Method 3: You may also specify the "fully qualified" DOS path to
start MyComm. For example:
C:\MYCOMM\MYCOMM
will also cause MyComm to start.
If you have questions about the DOS Path commands or statements
please refer to your DOS manual.
If you are using DOS version 3.0 or higher MyComm will
automatically find it's configuration file. This means that
MyComm may be started from any drive or directory on your system
without having to always start in the MyComm directory This will
save you the trouble (and typing) of changing directories when
you want to use MyComm.
MyComm will however try to start a new phone file in the
directory you are in unless you have included the fully qualified
path to the phone directory file in the Setup options. This
allows you to keep multiple phone files in different directories
depending on your needs.
MyComm Version 2.20 Documentation Page 12
2.4 Command Line Parameters
MyComm will take several "command line" parameters. Command
line parameters are commands that are typed after the program
name at the DOS prompt. For example typing
MYCOMM -J MYSCRIPT.SCP
on the command line will cause MyComm to start then to
immediately (after initial logo screen) "join" the script
MYCSCRIPT.SCP. A description of the command line parameters that
MyComm understands follows.
:2.4.1 Join Script
The -J <script name> parameter causes MyComm to start the named
script immediately after MyComm starts up. See the section "Join
Script" for more details on MyComm script functions. Please note
that the "Join Script" function takes precedence over the "Dial"
command described below.
:2.4.2 Dial Entries (Registered version only)
The -D <n1, n2, ... nx> function tells MyComm to mark the
dialing entries that correspond to the numbers after the -D and
begin dialing them. This would be the same as if you had gone
into the dialing directory and manually marked number for dialing
then started the Call command. For example
MYCOMM -D 2 4 14 15
will mark dialing entries 2, 4, 14, and 15 and then begin to call
those entries after MyComm initializes. Please note that entries
are separated by a space. If the dialing entry is invalid it is
ignored.
MyComm Version 2.20 Documentation Page 13
:2.4.3 Timed Start (Registered version only)
The -T <HH:MM> function starts a timer that waits until the
specified time before MyComm begins to do anything else. The
time may be entered as follows:
2:00 2:00 Am
14:00 2:00 Pm (military time)
2:00P 2:00 Pm
For example
MYCOMM -T 6:00P
would tell MyComm that you want to wait until 6:00 Pm before it
does something. This is especially useful for setting a timer
for the -J or -D commands (described above). While MyComm is
waiting for the start time a message box is displayed. You may
quit the timer by pressing the <ESC> key.
3.0 MyComm Screens and Menus
MyComm has several screens and menus to allow you to change
various options and to perform various functions. Most screens
and menus are brought up by pressing the <ALT> key and then a
letter. Pressing <F1> while in the terminal screen shows you
Help Menu which lists all of the MyComm functions (see also
section 3.2).
MyComm Version 2.20 Documentation Page 14
3.1 Terminal Screen
When MyComm is first loaded, and after the configuration file
has been read, it defaults to the terminal screen which looks
like this:
MyComm <Version Information>
Copyright (c) 1992 - 1994 Ken Dorshimer - All rights reserved.
Press <F1> for Help
Press <Alt-D> for Dial Screen
You will see the version number, and copyright notice.
In the terminal screen you may enter regular Hayes - AT modem
commands, or choose one of the many MyComm functions. The MyComm
functions are listed in the Help Menu which is displayed when you
press the <F1> key on your keyboard. The MyComm functions are
described in more detail in the following sections of this
manual.
MyComm Version 2.20 Documentation Page 15
3.2 Help Menu - F1
Pressing the <F1> key brings up the MyComm Help Screen which
looks like this:
(NOTE: many of the MyComm screens shown in this documentation are
smaller than actual size so that they will fit on a printed
page.)
+------------------------------------------------| MyComm Help |+
| |
| MyComm Commands |
| |
|Alt A Activate Chat Mode Alt M Manual Dial |
|Alt B Send Break Alt O Outside to DOS |
|Alt C Clear the Screen Alt P Change Port Parameters|
|Alt D Dialing Functions Alt Q Quick Re-Dial |
|Alt E Toggle Local Echo On/Off Alt R Run External Program |
|Alt H Hang up modem Alt S Session Capture On/Off|
|Alt I Send Modem Init. String Alt T Terminal Emulation |
|Alt K Scroll BacK Alt U Update Configuration |
|Alt L Current Line Status Alt W Write Screen to File |
|Alt J Join Script Alt X EXit MyComm |
| |
| |
|F1 Help With Commands PgDn Download Files |
|F2 Send Name PgUp Upload Files |
|F3 Send Password |
|F4 Send Tagline |
| |
| |
| MyComm <Version Information> |
| Copyright (c) 1992 - 1994 Ken Dorshimer - All rights reserved.|
| |
+---------------------------------------------------------------+
Pressing <Esc> or any other key closes the MyComm Help Screen
window.
3.3 Chat Mode - Alt A
Pressing the <ALT> and the "A" key brings you into the MyComm
Chat window. The chat screen is useful when you want to send
text messages or "chat" interactively with someone while on-line.
If you were not using the Chat Mode the "conversation" would
eventually end up looking like a garbled mess on your screen.
The Chat window is divided horizontally. The top half of the
screen is where received characters are written, the bottom half
is where the characters you type are written.
MyComm Version 2.20 Documentation Page 16
To exit Chat Mode, press the <Esc> key.
Please note: Some BBS "chat" systems send special control
characters to emulate a split screen chat or colors. Since there
is no filtering done by MyComm while in Chat Mode this may cause
strange looking characters in your receive window. If this
occurs, exit from Chat Mode and allow the BBS software to control
the chat session.
3.4 Send Break - Alt B
Pressing the <ALT> and the "B" key sends a special modem signal
called "BREAK". Some host systems use the Break signal to
perform special functions such as ending a session.
3.5 Clear the Screen - Alt C
Pressing the <ALT> and the "C" key clears the screen and resets
the current color attributes. Many host systems send color
information which stays in place even after you log off. Clear
Screen resets the screen colors to the ones you chose.
3.6 Dialing Functions - Alt D
Pressing the <ALT> and the "D" keys displays the MyComm Dial
Screen. From this screen you may add, delete, edit, view, find,
and mark phone list entries, and of course dial phone list
entries. You will see the options available from this screen
written into the little window at the bottom of the screen. The
letter which activates an option will appear highlighted or in a
different color. A description of the dialing functions follows.
You will see a bar highlighting the current phone list item.
The highlight bar may be moved up and down by using the Up-Arrow,
Down-Arrow, Page Up, Page Down, Home and End keys. The highlight
bar appears as reverse video bar on monochrome screens.
MyComm Version 2.20 Documentation Page 17
+------------------------------------------------| Dial Screen |+
| |
| # Name Phone Number Last Call |
| |
| 1 Your Favorite BBS 555-4657 01/26/92 |
| 2 The Music Board 555-8944 01/19/92 |
| . . . . |
| . . . . |
| . . . . |
| 15 00/00/00 |
|---------------------------------------------------------------|
| |
| Add Edit Delete Call Info Manual (Un)MarK Find Load |
| Sort moVe Print |
+---------------------------------------------------------------+
3.6.1 Add Phone List Item
Pressing the "A" key in the Dial Screen window adds a blank
entry after the currently highlighted entry.
3.6.2 Edit Phone List Item Screen
Pressing the "E" key in the Dial Screen window brings up the
Dial Edit window. This is where you set up the phone list entry
for each system you will call. There are several options to
choose from, and each is described. You may also use the Up-
Arrow and Down-Arrow keys to move between items. Items such as
Name, Number, etc use MyComm's Line Editor described in Appendix
B.
MyComm Version 2.20 Documentation Page 18
+----------------------------------------| Edit |+
| |
| Name: Your Favorite BBS |
| Number: 555-4657 |
| Baud Rate: 2400 Data Bits: 8 |
| Data Parity: None Stop Bits: 1 |
| Default Protocol: 1K-Xmodem |
| Dial Prefix: 1 ATDT*70 |
| Logon Name: Your Name |
| Password: Password |
| Terminal Type: ANSI |
| Local Echo: No |
| Received BS Destructive: Yes |
| BS Key Sends BS or DELete: BS |
| Strip Hi Bits? (Pure ASCII): No |
| Add LF after incoming CR?: No |
| Script |
| Clear last date called and number of calls? |
| |
+------------------------------------------------+
The following describes each phone list item and how to configure
it.
3.6.2.1 Name
Just type in the name of the bulletin board system or person
you will call here.
3.6.2.2 Number
The telephone number of the system you will call goes in here.
The telephone number may include spaces or hyphens for
readability (modems usually ignore spaces and hyphens).
Characters such as letters or other gibberish will probably
confuse your modem. MyComm will assume that whatever you put
here is a valid telephone number.
3.6.2.3 Baud Rate
Choose a baud rate (300, 1200, 2400, 4800, 9600, 19200, 38400,
57600, or 115200) that you want MyComm to use when connected to
the system. For a more accurate reading of the data rate during
file transfers (described elsewhere in this manual) and the on-
line status (also described elsewhere in this manual) the baud
rate should be set to the rate of the system that you will be
calling.
MyComm Version 2.20 Documentation Page 19
3.6.2.4 Data Bits
Choose the data bits (5, 6, 7, 8) that you want MyComm to use
when connected to the system. 8 data bits is the most common
setting for public bulletin board systems. 7 data bits are
common on mainframes and many Unix (Tm) systems. 5 and 6 data
bits are rarely used by many systems any longer, but are included
for completeness.
Most host systems in their advertisements, etc. tell you what
Data, Parity, and Stop bits they expect. You will often see them
listed as 8-N-1 or similar. 8-N-1 means 8 data bits, no parity
(None), and 1 stop bit. 8-N-1 is the most common setting used.
If in doubt, try 8-N-1 first.
3.6.2.5 Data Parity
Choose the data parity (None, Even, Odd, Mark, Space) that you
want MyComm to use when connected to the system. None is usually
used on most systems, especially with 8 data bits. Even parity
is common when using 7 data bits.
3.6.2.6 Stop Bits
Choose the stop bits (1, 2) that you want MyComm to use when
connected to the system. 1 stop bit is the most common.
3.6.2.7 Default Protocol
MyComm allows you to choose the file transfer protocol that you
will use by default for each system you call. Choose the
protocol which best suits your needs. A more complete
description of the various protocols is found later in this
manual in the section on Uploading and DownLoading Files.
3.6.2.8 Dial Prefix
Choose the dialing prefix that you want MyComm to use when
calling the number for this system. MyComm has slots for three
different dialing prefixes. Choose one by moving the highlight
bar to the selection you want. The dialing prefixes may be
changed to suit your needs in the Update Configuration menu
option.
MyComm Version 2.20 Documentation Page 20
3.6.2.9 Logon Name
This option lets you enter the name that you log on with when
you call this system. When bulletin board systems answer your
call they usually ask for your name and password.
Putting the characters "^M" at the end of the Logon Name causes
an <Enter> character to be sent. Some BBS's don't like seeing an
<Enter> character immediately after the Logon Name string when
logging on, in which case you should leave the "^M" out.
If Logon Name is filled in MyComm will send your logon name
when you push the <F2> key to save you some typing.
3.6.2.10 Password
This option lets you enter the password that you log on with
when you call this system. When bulletin board systems answer
your call they usually ask for your name and password.
If Password is filled in MyComm will send your logon password
when you push the <F3> key to save you some typing. If you are
really security conscious, then you may leave this option blank.
Putting the characters "^M" at the end of the Password causes
an <Enter> character to be sent. Some BBS's don't like seeing an
<Enter> character immediately after the Password string when
logging on, in which case you may leave the "^M" out.
3.6.2.11 Terminal Type
This option lets you choose the type of terminal emulation to
use when calling this system. The choices are TTY, ANSI, VT-52,
VT-100 and 3270 (registered version only).
TTY (TeleTYpe) gives no emulation what-so-ever. The characters
appear on your screen just as they come in with no formatting.
ANSI emulation provides functions similar to your ANSI.SYS
driver to provide color attributes (except on mono monitors of
course), blinking characters and other goodies. MyComm uses
intelligent ANSI character translation which filters out any ANSI
sequences which cause "keyboard re-mapping". This prevents the
unscrupulous from sending ANSI sequences to your personal
computer system that could potentially cause damage or annoyance.
VT-52 and VT-100, and 3270 are most commonly used on mainframe
hosts. Some bulletin boards also support these. Both of these
emulations support a subset of the DEC protocols including a
mapping to the "keypad mode" used to generate commands on DEC
MyComm Version 2.20 Documentation Page 21
terminals. It should be noted that VT-52 is an "ANSI
incompatible" emulation, and VT-100 is ANSI compatible.
A listing of the keys supported for the ANSI, VT-52, VT-100,
and 3270 emulations is in Appendix C - Terminal Emulations.
3.6.2.12 Local Echo
Local Echo is used when the other system does not send the
characters typed on your terminal back to you. Most systems do
echo characters back, so Local Echo is normally off ("No"). If
you find that you can't see what you are typing when connected to
a system, set Local Echo on ("Yes"). On the other hand if you
see double characters when you hit a key (for example you see
"xx" when you type an "x") then Local Echo should be off ("No").
3.6.2.13 Received BS (BackSpace) Destructive
This option tells MyComm whether received BackSpace or DELete
characters should back up the cursor and erase what was there.
Usually this On.
3.6.2.14 BS Key Sends BS or DELete
This option tells MyComm whether to send a BS (BackSpace - 8
decimal) or DEL (Delete - 127 decimal) character when the
backspace key is pressed. Usually this is set to BS. Mainframe
hosts usually like to see DEL rather than BS.
3.6.2.15 Strip Hi Bits
This option tells MyComm whether to strip the high bit from
received and sent characters. Usually this is set to "No".
Just for your own information, bytes on the personal computer
are 8 bits long. So, the bit-map of a byte might be 10011101.
The left-most bit is the high bit. So if you were to strip the
high bit, the byte above would become 00011101. Pure ASCII only
covers bytes in the range of 00000000 (0 decimal) to 01111111
(127 decimal). The ANSI extended set includes values from
10000000 (128 decimal) to 11111111 (255 decimal). So by
stripping the high bit, a character is guaranteed to be in the
range of the pure ASCII character set.
MyComm Version 2.20 Documentation Page 22
3.6.2.16 Add LF after incoming CR
This option tells MyComm whether to add a LF (Line Feed - 10
decimal) character after a CR (Carriage Return - 13 decimal)
character is received. Usually this is set to "No".
If you notice that the lines on the screen seem to look odd or
do not scroll up properly, you will want to turn this on (Yes).
3.6.2.17 Clear last date called and number of calls
Each time you connect with a system MyComm updates the last
date and time called portion the dialing entry record. If you
want to reset the date and time the system was last called and
the number of times you have called it, answer "Yes" here.
3.6.2.18 Script
This is where you will put the name of the script file that you
want to run ("Join") when you connect with this system. For a
complete discussion of the MyComm script language see Appendix -
E "MyComm Script Language".
3.6.2.19 Save Changes (not shown in example)
MyComm asks if you want to save the changes you just made. If
you answer "Yes" MyComm updates the phone file on your disk
drive. When MyComm updates the phone file a backup of the phone
file is created and named PHONE.OLD.
3.6.3 Delete an Item
Pressing the "T" key allows you to delete the item that is
currently at the dialing highlight bar. MyComm asks you to
confirm the delete request before proceeding. MyComm also
updates the phone file on your disk drive.
3.6.4 Call Numbers (Dial)
Pressing the "C" key tells MyComm that it's time to start
calling numbers in the Dialing List (See also section 3.6.7
(Un)MarK). Pressing the <Enter> key also will start the dialing.
If no Dialing List Items are "marked" MyComm will dial the
number that the highlight bar is currently resting on. If there
are "marked" Dialing List Items, MyComm will start dialing the
marked numbers in sequence until a connection is made. During
MyComm Version 2.20 Documentation Page 23
the dialing attempts you may cancel the dialing by pressing the
<Esc> key.
While MyComm is calling numbers and waiting for a connection, a
Dial Status Window is displayed (see example below). The status
window shows who is being called and the telephone number, how
many call tries have been made so far, the status of the last
dialing try, the time in seconds until this try "times out", the
time since you started calling, and the time that the current
dialing attempt started.
+-------------------------------------------------------| Dial |+
| |
| Calling: Your Favorite BBS At: 555-4657 |
| |
| Try # 1 Last Status: None Yet Dial Time: 42 |
| |
| Dialing started at: 3:01:20 This try started at: 3:01:21 |
| |
| |
| Hit ESC to quit dialing, 'N' for next number, |
| or 'D' to delete number from list. |
| |
+---------------------------------------------------------------+
Pressing the "N" key causes MyComm to stop dialing the number
it is currently dialing and to skip to the next marked number.
Pressing the "D" key causes MyComm to stop dialing the number
it is currently calling and to remove it from the list of
"marked" numbers. If you press "D" and the number is the only
one left in the "marked" list, MyComm will give you a warning and
stop dialing.
The Dial Time and Pause Time between calls is a user
configuration option which may be set up in the Update
Configuration menu described later in this document.
3.6.5 Phone Item Info Screen
The Phone Item Info Screen looks very much like the Edit Phone
List Item Screen with the exception that the Last Call Date, Last
Call Time, and Number of Calls fields are shown. If you see
something you want to change, pressing "E" will bring you to the
Edit Phone List Item Screen.
MyComm Version 2.20 Documentation Page 24
+------------------------------| Phone Item Info |+
| |
| Name: Your Favorite BBS |
| Number: 555-4657 |
| Baud Rate: 2400 Data Bits: 8 |
| Data Parity: None Stop Bits: 1 |
| Default Protocol: 1K-Xmodem |
| Dial Prefix: 1 ATDT*70 |
| Logon Name: Your Name |
| Password: Password |
| Terminal Type: ANSI |
| Local Echo: No |
| Received BS Destructive: Yes |
| BS Key Sends BS or DELete: BS |
| Strip Hi Bits? (Pure ASCII): No |
| Add LF after incoming CR?: No |
| |
| Last Call Date: 01/26/92 |
| Last Call Time: 4:26:12 |
| Number of Calls: 28 |
| |
| Press "E" to Edit Record |
+-------------------------------------------------+
3.6.6 Manual Dial Screen
Pressing "M" brings up the Manual Dial Screen. The Manual Dial
Screen lets you enter a single phone number to dial. The dialing
prefix used is always Dialing Prefix number 1.
Pressing <Esc> cancels the function. Pressing <Enter> accepts
the telephone number and the usual Dialing Status Window appears.
+-------------------------------------| Manual Dial |+
| |
| Enter phone number: 555-1234 |
| |
+----------------------------------------------------+
3.6.7 Mark Phone List Items
Pressing "K" marks or un-marks phone list items for later
dialing. As a convenience, pressing the <Space> bar also marks
and un-marks items. When a phone list item is marked a chevron
("»") will appear next to the item.
MyComm Version 2.20 Documentation Page 25
3.6.8 Find Phone List Items
Pressing "F" brings up the Find Phone List Items screen (not
shown). Simply type in the characters in the name, or a partial
phone number that you want to find. The search is started at the
top of the list. If the search fails, a message is displayed.
3.6.9 Load Phone List Screen
Pressing "L" brings up the Load Phone List Screen. You may
keep more than one phone dialing list. Each list will hold up to
100 telephone numbers. If the dialing list you select does not
yet exist, MyComm will display an empty dialing list.
Again, when changes are made to the phone file, MyComm will
create or update the file PHONE.OLD as a backup. There is only
one PHONE.OLD backup file kept, so all new backups overwrite the
last PHONE.OLD backup file.
3.6.10 Sort Phone List
You may sort the Phone List in one of four ways:
- by BBS name
- by Telephone number
- by last date called
- by number of times called
The sort option will also ask you for Ascending or Descending
sort order. Simply select the sort option that best suits your
needs. The list will be saved in the new sort order. Pressing
<Esc> exits the Sort menu.
3.6.11 Move Phone List Item
This option allows you to move a phone list item to another
location in the list. This will save you some retyping if you
want to customize your phone list.
To use this option move the highlight bar to the phone list
item that you want to move. Press the "V" key. Next use the up
and down arrow keys to move the highlight bar to the position
that you would like the item moved to. Press the <Enter> key to
make the move permanent, or <Esc> to quit the move.
MyComm Version 2.20 Documentation Page 26
3.6.12 Print Phone List
This option allows you to print the phone list. The phone list
may also be "printed" to a text file. The printed output shows
the BBS name, phone number, and last date called.
To use this option press "P". You will then be asked for a
file name to "print" to. To print to your printer (PRN) simply
press <Enter> (PRN is a standard DOS device name for the
printer). A status message is displayed while the phone list is
being printed. The printing may be stopped by pressing the <Esc>
key.
3.7 Local Echo On/Off - Alt E
Local Echo is used when the other system does not send the
characters you typed on your terminal back to you. Most systems
do echo characters back, so Local Echo is normally off ("No").
If you find that you can't see what you are typing when connected
to a system, set Local Echo on (Yes). On the other hand if you
see double characters when you hit a key (for example you see
"xx" when you type an "x") then Local Echo should be off ("No").
3.8 Hang Up Modem - Alt H
Pressing the <ALT> and the "H" key tells MyComm that you want
to disconnect from your current telephone connection. MyComm
will try to hang up the phone first by dropping the modem signal
called DTR, and if that fails by sending the Hang Up String
defined in the Modem Setup Screen (see section 3.17.1 Modem
Setup Screen). If you don't want MyComm to use DTR to hang up
the modem set the option "Use DTR to Hang Up Modem" in Modem
Setup Screen to "No".
3.9 Send Modem Initialization Strings - Alt I
Pressing the <ALT> and the "I" key brings up the Send Init.
String Menu shown below. Choosing one of these options will send
the Modem Initialization String, or the Hang Up String (same as
<Alt> + H), or the Modem Attention String, or the Phone Answer
String. These strings are defined in the Modem Setup Screen (see
section 3.17.1 Modem Setup Screen).
MyComm Version 2.20 Documentation Page 27
+-------| Send... |+
| Init. String |
| Hang Up String |
| Attention String |
| Phone Answer |
+------------------+
3.10 Join Script - Alt J
This option will allow you to "Join" in or run a script file.
You will be asked to supply the name of the script file which
MyComm will then load. If the script file can not be opened you
will see an error message. You may quit the script by pressing
the <Esc> key until you see the "Yes/No" window that asks if you
want to quit the script. See Appendix-E "Script Language" for
more information on script files.
3.11 Present Line Status - Alt L
Pressing the <ALT> and the "L" key brings up the Present Line
Status Window. This window tells you the current COM Port
Status, i.e. what Port, Baud Rate, Data Bits, Parity Bits, and
Stop Bits are in effect, whether you are on-line and for how
long. If you are on-line MyComm tells you the name of the system
you are logged onto, and the default file transfer protocol.
Also shown is the present Local Echo status and whether Session
Capture is active. Pressing <Esc> closes the window.
+--------------------------| Present Line Status |+
| |
| COM Port Status COM2, 2400, 8, N, 1 |
| ---------------------------------------- |
| |
| On-line: Yes Time On-line: 0:00:00 |
| Logged on to: My Favorite BBS |
| Current Protocol: None |
| ---------------------------------------- |
| |
| Local Echo On: No |
| Screen Capture On: Yes |
| ---------------------------------------- |
| |
| Current Time: 12:34:56 Date: 01/23/93 |
+-------------------------------------------------+
MyComm Version 2.20 Documentation Page 28
3.12 Scroll Back - Alt K
Pressing the <ALT> and the "K" key brings up the "scroll back"
buffer. MyComm saves the last few screens of received text for
you. This option allows you to see what has been recently
received in case there was something that went by too quickly
that you would like to look at again. The scroll back buffer
saves about two to three screens worth of information depending
on how much actual text was in the previous screens (about 4K's
worth). The scroll back buffer does not display ANSI or high bit
characters, they are stripped out to leave more room for useful
information.
When the scroll back buffer is first shown it displays the very
beginning of the buffer information. The up-arrow, down-arrow,
Page Up, and Page Down keys scroll the text. You may also write
the buffer to a file by pressing the "W" key. To exit press the
<Esc> key.
3.13 Manual Dial - Alt M
Pressing the <ALT> and the "M" key brings up the Manual Dial
Screen. The Manual Dial Screen lets you enter in a single phone
number to dial. The dialing prefix used is always Dialing Prefix
number 1. The parity setting is always 8-N-1.
If you press <Esc> you may cancel the selection. Pressing
<Enter> accepts the telephone number and the usual Dialing Status
Window appears. This is exactly the same function as in the
Dialing Screen, selection "M", described above.
3.14 Outside to DOS - Alt O
Pressing the <ALT> and the "O" key lets you shell out of MyComm
to DOS. You may use the Outside to DOS even when you are on-
line. Typing "EXIT" on the DOS command line brings you back to
MyComm.
One point of interest here: if you switch to a different drive
or directory while in the DOS shell, MyComm will automagically
bring you back to the drive and directory you started from when
you type "EXIT" to return to MyComm.
MyComm Version 2.20 Documentation Page 29
3.14 Change Port Parameters - Alt P
Pressing the <ALT> and the "P" key brings up the Change Port
Parameters Screen (see example below). MyComm will let you
change the port configuration, even while on-line. Please note
however that changing the COM Port while on-line will probably
disconnect the current session. However Data, Parity, and Stop
Bits may be changed.
Please note that the changes done here are not permanent. To
make permanent changes to the COM port settings, you must use the
"Update Configuration" which is brought up by pressing <Alt> and
"U" then the "M" key.
+-----------------------| Change Port Parameters |+
| |
| Present settings: COM2, 2400, 8, N, 1 |
| |
| COM Port:2 |
| |
| +---------+ |
| | 1: COM1 | |
+-----------| 2: COM2 |---------------------------+
| 3: COM3 |
| 4: COM4 |
| 5: COM5 |
| 6: COM6 |
| 7: COM7 |
| 8: COM8 |
+---------+
3.16 Quick Re-Dial - Alt Q
Pressing the <ALT> and the "Q" key allows you to redial the
last number that MyComm dialed. This is especially useful for
re-dialing manually entered telephone numbers.
3.17 Run External Program - Alt R
Pressing the <ALT> and the "R" key brings up the Run External
Program Screen (not shown). MyComm lets you define an editor
program plus up to three other programs that you may run without
leaving your MyComm session. The external programs are defined
in Paths Setup (see 3.19.2 Paths Setup).
If there is not enough available memory to run the external
program, the external program will not run and control passes
directly back to MyComm.
MyComm Version 2.20 Documentation Page 30
3.18 Session Capture On/Off/Pause - Alt S
Pressing the <ALT> and the "S" key opens the MyComm Session
Capture Screen (not shown). You may either accept the default
name that MyComm provides for the capture file or enter a new
name. If the Drive:\Path\Filename is in any way invalid, MyComm
will issue an error message. You may also press <Esc> to leave
the Session Capture Screen without starting the Session Capture.
After a Session Capture has begun pressing the <ALT> and the
"S" key again will allow you to Close, or Pause/Resume the
capture file.
If you exit MyComm and forget to Close the Session Capture
file, MyComm will do it for you.
Please note that often while Session Capture is active, that
the display may appear jerky, or start and stop from time to
time. This is normal during Session Capture as it is the time
that MyComm is writing the file to disk.
It may also be important to know that the Session Capture does
not do any ANSI filtering. What you see is what you get.
Generally you will read the Session Capture file using a text
editor or word processor when you are no longer "on line". Text
editors and word processors often perform ANSI filtering for you.
3.19 Terminal Emulation - Alt T
MyComm allows you to reset the Terminal Emulation even while
on-line. The options are: TTY, ANSI, VT-52, VT-100, and 3270.
Further information on the emulation may be found in Appendix C -
"Terminal Emulations".
3.20 Update Configuration - Alt U
Pressing the <ALT> and the "U" key brings up the Update
Configuration Menu (see below). From this menu you may choose
various options to allow you to customize the MyComm
configuration. You may either use the Up and Down-Arrow keys,
then press <Enter> to choose an option, or simply press the
highlighted letter of the option you want. A description of the
options that may be configured follows.
MyComm Version 2.20 Documentation Page 31
+---| Update Configuration |+
| Modem Setup |
| Paths and Filenames |
| File Transfer Options |
| Other Stuff for MyComm |
| COM Port Addresses |
| Save Configuration |
| Exit |
+---------------------------+
3.20.1 Modem Setup Screen
The Modem Setup Screen (see below) allows you to make changes
to the various setting that control the modem. You may move from
item to item by using the Up and Down-Arrow keys and then
pressing <Enter>. Some of the items use MyComm's built in line
editor to modify the item, others use little pop-up Yes/No
windows. If you want to exit without making any changes, just
press the <Esc> key. A description of each item in the Modem
Setup Screen follows.
+------------------------------------------------| Modem Setup |+
| |
| COM Port: COM2, 2400, 8, N, 1 |
| Modem Initialization String: ATM0X4Q0V1S0=0S11=50S7=50^M |
| Modem Attention String: +++ |
| Modem Hang Up String: ATH0^M |
| Modem Answer String: ATA^M |
| Modem Cancel Dial String: ^M |
| Modem Dial Suffix String: ^M |
| Dialing Wait Time, in Seconds: 45 |
| Pause Between Calls, in Seconds: 4 |
| Local Echo on by Default? No |
| Use DTR to Hang Up Modem? Yes |
| Use XON/XOFF Flow Control? Yes |
| Use CTS/RTS Flow Control? No |
| Use DSR/DTR Flow Control? No |
| Dialing Prefix #1: ATDT*70 |
| Dialing Prefix #2: ATDT 9, |
| Dialing Prefix #3: ATDT 1 |
| |
| |
| Use Up and Down Arrows to move between items |
| Hit <Enter> to edit, <Esc> to Quit |
| |
+---------------------------------------------------------------+
MyComm Version 2.20 Documentation Page 32
3.20.1.1 COM Port
The COM Port selection allows you to set various COM port
settings.
When you first installed your modem you probably set the COM
port up for COM1, COM2, etc. use the setting correct for your
modem. If you set the wrong COM port in this area, MyComm
doesn't mind, but won't let you dial numbers later on.
MyComm does not re-initialize the COM port when you make
changes in this menu. The new COM port settings will be used the
next time that you run MyComm. If you need to change the COM
port settings now, use the Alt-P function from the main terminal
screen.
The baud rate should be set to whatever the top speed of your
modem is. Refer to your modem user manual if you're not sure.
The most common settings for the Data, Parity, and Stop bits
are 8-N-1 (8 data bits, no parity, 1 stop bit). If you require
different settings, this is the place to change them.
3.20.1.2 Modem Initialization String
This option lets you set up the Modem Initialization String.
This is the string which is sent to the modem to "wake it up" and
set options when MyComm is first loaded. The initialization
string is made up of Hayes "AT" commands. The command line
always starts with the letters "AT". The rest of the line
contains various options for your modem. Your modem manual
should have a list of the commands that are valid for your modem.
MyComm always likes to have AT LEAST the Q0, V1, and X4
commands. Q0 tells the modem to ALWAYS send result codes, V1
tells the modem to ALWAYS send the text, not numeric, result
codes. MyComm needs the result codes in text format to monitor
call progress, and to send you other useful information that the
modem produces. X4 (your modem may use X1, X2, etc) tells the
modem to send "verbose" modem status information to MyComm.
You should place "^M" at the end of the Initialization String
so that MyComm will send a Carriage Return at the end of the
line.
High speed modem users: If you need to set "flow control" options
for your modem in the setup string this is the place to do it.
For example, if your modem needs to use RTS/CTS flow control the
Hayes AT command "&K3" should be added to the initialization
string.
MyComm Version 2.20 Documentation Page 33
3.20.1.3 Modem Attention String
This is the Attention signal that tells the modem that you want
it's undivided attention for something. Most Hayes compatible
modems use three plus signs "+++" as the attention string. Refer
to your modem manual if you use a different Attention string.
3.20.1.4 Modem Hang Up String
This is the string that tells your modem to hang up the
telephone line. On most Hayes compatible modems this is ATH0.
You may use the characters "^M" to have MyComm send a Carriage
Return after it sends the Hang Up string (recommended). Refer to
your modem manual if you use a different Hang Up string.
3.20.1.5 Modem Answer String
This is the string that tells your modem to answer the
telephone. On most Hayes compatible modems this is ATA. You may
use the characters "^M" to have MyComm send a Carriage Return
after it sends the Answer string (recommended). Refer to your
modem manual if you use a different Answer string.
3.20.1.6 Modem Cancel Dial String
This is the string that tells your modem to cancel dialing a
telephone number. On most Hayes compatible modems this just a
Carriage Return (13 decimal). You may use the characters "^M" to
send a Carriage Return after it sends the Cancel Dial string
(recommended). Refer to your modem manual if you use a different
Cancel dialing string.
3.20.1.7 Modem Dial Suffix String
This is the string that tells your modem what to terminate
telephone numbers with when dialing. On most Hayes compatible
modems this just a Carriage Return. You may use the characters
"^M" to have MyComm send a Carriage Return as the Dial Suffix
string (recommended). Refer to your modem manual if you use a
different Dial Suffix string.
MyComm Version 2.20 Documentation Page 34
3.20.1.8 Dialing Wait Time
After MyComm dials a number it waits for this amount of time
for a connection. Waiting stops automatically if MyComm detects
a BUSY signal. The valid range for Dialing Wait Time is 1 to 240
seconds.
In general a wait time of 45 seconds is good for most local and
long-distance calls, 60 seconds for international calls.
You will also want to add "S7=nn" (without the quotes), to your
modem Initialization String (see above). Replace "nn" with a
number greater than or equal to the time set in Dialing Wait
Time.
3.20.1.9 Pause Between Calls
If a connection is not made after dialing due to a BUSY signal
or a time-out, MyComm resets the modem and waits the amount of
seconds specified in the Pause Between Calls before trying to
dial again. The valid range for Pause Between Calls is 0 to 60
seconds.
In most cases a pause time of 2 to 5 seconds is sufficient for
the modem to reset.
3.20.1.10 Local Echo on by Default
Local Echo is used when the other system does not send what you
typed on your terminal back to you. Most systems do echo
characters back, so Local Echo is normally off ("No"). If you
find that you can't see what you are typing when connected to a
system, set Local Echo on (Yes). On the other hand if you see
double characters when you hit a key (for example you see "xx"
when you type an "x") then Local Echo should be off ("No").
3.20.1.11 Use DTR to Hang Up Modem
This option allows you to set whether MyComm should use the
modem signal called DTR to terminate connections. Using DTR to
hang up is usually faster than just sending the Hang Up String
(above). This option is usually set to "Yes".
However, some modems don't like to have DTR messed with. You
can usually tell if the modem doesn't like you to fool with DTR
as it will cause your computer system to lock up (not a bad thing
really, just terribly annoying - re-booting always fixes this).
MyComm Version 2.20 Documentation Page 35
Refer to your modem manual if you have questions about whether to
use DTR to hang up the telephone connection.
NOTE: some modems require that you add "&D2" to your
initialization string (see above) to enable the DTR line
monitoring. Check your modem manual for further details.
3.20.1.12 Use XON/XOFF Flow Control
This tells MyComm whether it should use the XON/XOFF flow
control while in terminal mode and during ASCII file transfers.
This default for this option is "Yes".
3.20.1.13 Use CTS/RTS Flow Control
This tells MyComm whether to use CTS/RTS flow control.
This is used with high speed modems and null modem cable links to
regulate the flow of data. If the modem supports CTS/RTS flow
control this should be on (refer to the user manual for your
modem). If a null modem cable is being used and these signals
are to be sent over the cable, this should be on.
You may also want to add "&K3" to your initialization string
(see above) to enable your modem to follow CTS/RTS status. This
option is most often used on high speed modems.
3.20.1.14 Use DSR/DTR Flow Control
This tells MyComm whether to use DSR/DTR flow control.
Hardware handshaking is used with high speed modems and
sometimes null modem cable links to regulate the flow of data.
If the modem supports DSR/DTR flow control this should be "Yes"
(refer to the user manual for your modem). If a null modem cable
is being used and these signals are to be sent over the cable,
this should be on.
You may also want to add "&D2" to your initialization string
(see above) to enable your modem to follow DTR status. This
option is most often used on high speed modems.
3.20.1.15 Dialing Prefixes
Dialing Prefixes are dialing codes such as area codes, that get
sent before a telephone number is dialed. You may set up three
different dialing prefixes. Each dialing prefix may be up to 25
character/digits long.
MyComm Version 2.20 Documentation Page 36
For example, if you have Call Waiting (Tm) you can disable it
by dialing *70 (that's asterisk - 70) before the number you're
calling (this works in the my dialing area, your dialing area may
differ). If you were to set one of your dialing prefixes to *70
MyComm would "prefix" every number you called with *70. The
dialing prefixes may also be used to store long distance codes,
or whatever dialing codes you would want to have dialed before a
number.
3.20.1.16 Connect Strings
MyComm will use the strings defined in Connect and No Connect
strings to determine the dialing status. From this option you
will be able to change the strings that MyComm will use as
responses from your modem.
There is one "Connect" string and four "No Connect" strings.
The Connect string should be the same as the one your modem
generates when a connection has been made. The default is
"CONNECT" which is fairly standard. Please note: you must define
this string so that MyComm will know when a connection has been
made. MyComm does not rely on the Carrier Detect signal to
determine when it has connected during dialing!
The "No Connect" strings should be set to whatever strings your
modem generates when a connection is not made during dialing.
When MyComm sees one of these responses from the modem during
dialing it stops waiting for a connection and moves on to the
next number to be dialed. The default strings are "BUSY", "NO
CARRIER", "NO DIALTONE", and "VOICE".
3.20.2 Paths Setup
The Paths Setup Screen (see below) is where you set up paths to
directories that you want MyComm to know about. A description of
the various system paths follows.
MyComm Version 2.20 Documentation Page 37
+---------------------------------------------| Paths Setup |+
| |
| Directory to Download files to: C:\PUBLIC\ |
| Directory to Upload files from: C:\PUBLIC\ |
| Path\File for Screen Capture: C:\PUBLIC\MYCOMM.SCR |
| Path\File for Session Capture: C:\PUBLIC\MYCOMM.SES |
| Path\File for Phone File: C:\MYCOMM\MYCOMM.PHN |
| Path\Filename.Ext for Editor: C:\UTIL\EDITOR.EXE |
| Path\Filename.Ext of Xter Prog1: C:\SOMEPRGM.EXE |
| Path\Filename.Ext of Xter Prog2: C:\ |
| Path\Filename.Ext of Xter Prog3: C:\ |
| |
| |
| Use Up and Down Arrows to move between items |
| Hit <Enter> to edit, <Esc> to Quit |
| |
+------------------------------------------------------------+
3.20.2.1 Download Directory
This option tells MyComm which directory you want MyComm to put
files that are downloaded from another system. Notice that the
path always ends in a backslash ( "\" ) character.
3.20.2.2 Upload Directory
This option tells MyComm which directory you want MyComm to get
the files from that will be uploaded to other systems. Notice
that the path always ends in a backslash ( "\" ) character.
3.20.2.3 Path\File for Screen Capture
This option tells MyComm which directory and the filename that
you want MyComm to use for the Screen Capture file. Screen
Capture is activated by <Alt> + W.
3.20.2.4 Session Capture Path\File
This option tells MyComm which directory and the filename that
you want MyComm to use for the Session Capture file. Session
Capture is activated by <Alt> + S.
MyComm Version 2.20 Documentation Page 38
3.20.2.5 Phone File Path\File
This option tells MyComm which directory and the filename that
you want MyComm to use for the Phone File which contains your
dialing directory. You may have multiple Phone Files, but this
is the one that MyComm will load when it starts up.
3.20.2.6 Editor Path\Filename
If you want to use an editor program without leaving MyComm,
this option lets you tell MyComm the path and filename of the
editor. Notice that the filename of the editor must include not
only the filename, but the extension (.EXE or .COM) as well.
3.20.2.7 External Programs Path\Filename
You may define up to three other external programs to run
without leaving your MyComm session. Use these options to tell
MyComm the paths and filenames of the programs. Notice that the
filename of the programs must include not only the filename, but
the extension (.EXE, .COM, or .BAT) as well.
3.20.3 Protocols Setup
The Protocols Setup Menu (see example below) allows changes to
parameters for ASCII file transfers, Kermit file transfers,
Zmodem file transfers, and the external protocols.
The usage of these options follows.
+--| Protocol Setup |+
| ASCII Transfers |
| Zmodem Transfers |
| Kermit Transfers |
| EXternal Protocols |
| Exit |
+--------------------+
3.20.3.1 ASCII Transfers Setup
The ASCII Transfers Setup screen (see example below) lets you
set up the parameters for ASCII file transfers. ASCII file
transfers are only used to transfer text files. Program files
and archived files, also known as binary files, should not be
transferred as ASCII files. Most of the options for the ASCII
transfers work well with their default settings. A description
of the different options follows.
MyComm Version 2.20 Documentation Page 39
+----------------------------| ASCII Transfers Setup |+
| |
| Strip High Bits?: No |
| Remote Abort Char (0 for none): 0 (ASCII Value) |
| |
| ASCII Upload Options |
| CR Translation: None |
| LF Translation: None |
| Local Echo On During Uploads?: Yes |
| Expand Blank Lines to Spaces?: No |
| Line Pace time in 1/10 seconds: 0 |
| Char Pace time in 1/10 seconds: 0 |
| Pacing Char (0 for none): 0 (ASCII Value) |
| |
| ASCII Download Options |
| CR Translation: None |
| LF Translation: None |
| |
| Use Up and Down Arrows to move between items |
| Hit <Enter> to edit, <Esc> to Quit |
+-----------------------------------------------------+
3.20.3.1.1 Strip High Bits
This option tells MyComm whether to strip the high bit from
received and sent characters during ASCII uploads and downloads.
Usually this is set to "No". See also section 3.6.2.15 "Strip
High Bits" for a discussion of "high bits".
3.20.3.1.2 Remote Abort Char
If the system you're performing the ASCII file transfer with
uses an abort char to cancel transfers you should set this value.
The value is in the range of 1 to 255. A value of zero (0), the
default, means MyComm won't look for the abort character during
ASCII file transfers.
3.20.3.1.3 CR Translation Upload and Download
Some systems require a CR (Carriage Return) character placed
before the LF (Line Feed) character during ASCII file transfers.
If the lines of the file look odd after the transfer, this may be
the case.
MyComm Version 2.20 Documentation Page 40
3.20.3.1.4 LF Translation Upload and Download
Some systems require a LF (Line Feed) character placed after
the CR (Carriage Return) character during ASCII file transfers.
If the lines of the file look odd after the transfer, this may be
the case.
3.20.3.1.5 Local Echo On During Uploads
During ASCII uploads if you want to watch the file transfer set
this option to "Yes". This is often used when uploading a
message into a bulletin boards message base. When this option is
set to "No", the usual file transfer window is shown as the
upload progresses. Please note that when this option is set to
"No" a Ctrl-Z (end of file marker) character is sent at the end
of the file transfer. When set to "Yes" the Ctrl-Z is not sent.
3.20.3.1.6 Expand Blank Lines to Spaces
This option tells MyComm to expand lines that are empty except
for a CR/LF into a line of spaces that end with a CR/LF. This is
useful when you are uploading a message to a bulletin board.
Some boards interpret a blank line with only a CR/LF as the end
of message signal. Expanding blank lines allows you to upload
the entire message.
3.20.3.1.7 Line Pace Time
This options tells MyComm to how much time to wait between
sending each line of text from the ASCII file. Some systems
can't handle high speed ASCII transfers, this gives the other
system time to "think". The value entered from 0 (the default)
to 255 are in increments of 1/10 second (approximately).
3.20.3.1.8 Character Pace Time
This options tells MyComm how much time to wait before sending
each character from the ASCII file. Some systems can't handle
high speed ASCII transfers, this gives the other system time to
"think". The value entered from 0 (the default) to 255 is in
increments of 1/10 second (approximately).
MyComm Version 2.20 Documentation Page 41
3.20.3.1.9 Pacing Char
Some systems send a Pacing Character to limit throughput on
ASCII transfers. MyComm will wait for the Pacing Char before
sending each line of the file. The Pacing Char value ranges from
1 to 255 which represents an ASCII value. A value of zero (0),
the default, means MyComm will not look for the Pacing Char.
3.20.3.2 Zmodem Transfers Setup
MyComm lets you define certain special functions used in the
Zmodem file transfer protocol. A description of these follows.
3.20.3.2.1 Zmodem 32 Bit CRC
Zmodem uses either a 16 bit or a 32 bit CRC for error detection
during file transfers. The 32 bit CRC provides a much higher
degree of accuracy than its 16 bit cousin. However the
calculation involved in the 32 bit CRC may slow the file transfer
rate (by only a few CPS though). If you want a high degree of
error detection this option should be set to "Yes". For higher
transfer speed, set this option to "No".
3.20.3.2.2 Zmodem Auto Download Feature
When this option is set to "Yes" MyComm will automatically
start a Zmodem download file transfer for you. The Zmodem
protocol at the host's end sends some special characters when it
starts up a Zmodem transfer. MyComm looks for these characters
and will save you some typing by starting up the Zmodem download
for you. If you don't want to use this feature, set this option
to "No".
3.20.3.2.3 Zmodem Send Crash Recovery
Sometimes a file transfer will fail after a file has been
partially sent. A file transfer could fail due to excessive
line noise for example. Zmodem has a rather nifty feature that
will attempt to restart a failed file transfer.
For normal use this feature should be set to "No". If you want
to attempt to restart a failed Zmodem transfer set this option to
"Yes" before beginning the upload again. If the system you are
trying to upload the file to supports the "Crash Recovery"
feature the file transfer will resume where it left off.
MyComm Version 2.20 Documentation Page 42
3.20.3.2.4 Zmodem Receive Crash Recovery
Sometimes a file transfer will fail after a file has been
partially received. Zmodem has a rather nifty feature that will
attempt to restart a failed file transfer.
For Normal use this feature should be set to "No". If you want
to attempt to restart a failed Zmodem transfer then set this
option to "Yes" before beginning the download again. If the
system you are trying to download the file from supports the
"Crash Recovery" feature the file transfer will resume where it
left off.
THIS OPTION SHOULD BE USED WITH CARE. If this option is set to
"Yes" and you download a file from another system that has the
same name as a file you already have in your download directory,
the end of the existing file will be overwritten with the
information from the new file. This option should only be set to
"Yes" when you are attempting to restart a previously failed
Zmodem transfer.
NOTE: the Zmodem Crash Recovery option has some rudimentary
idiot proofing. The option will not perform the transfer if the
file you have has a different time/date stamp than the other
system, or if the file that you have is larger than the file on
the other system.
3.20.3.4 Kermit Transfers Setup
Kermit was designed to allow many different types of machines
to send data to each other. In order to do this Kermit places a
special "escape" character before any control characters
encountered. However this compatibility does have its price,
Kermit is one of the slowest protocols in use today. There are
several parameters that may be adjusted. Most people will never
need to change any of these, but for those who may a brief
description follows.
MyComm Version 2.20 Documentation Page 43
File Format: Binary or ASCII. Generally 8 bit or 8th
bit stripped (sometimes called "Text"
mode) respectively
Packet Size: Allowable range is 10 to 94
Number of Pad Chars: 0 - none, if needed valid range 1 to 94
Pad Char: 0 - ignored, if needed valid range 1 to
94
Quote Char: 35 ASCII, 23 hex, # symbol by default
Packet Start Char: 01 ASCII, SOH by default
EOLN Char: 13 ASCII, 0D hex, carriage return by
default
3.20.3.4 External Protocols Setup
Up to six external file transfer protocols may be defined.
Once defined the external file transfer protocols will appear in
the Upload and Download protocol selection menus.
Use the Up and Down-Arrow keys to move from item to item. The
<Enter> key selects an item for editing and saves the completed
edit. Pressing the <Esc> key quits the edit.
+-----------------------------------| External Protocols Setup |+
| |
| Protocol Name Upload.Bat Download.Bat Ask FileName |
| |
| 1: BIGFAST BIGFASTU.BAT BIGFASTD.BAT No |
| 2: Yes |
| 3: Yes |
| 4: Yes |
| 5: Yes |
| 6: Yes |
| |
| Use Up and Down Arrows to move between items |
| Hit <Enter> to edit, <Esc> to Quit |
+---------------------------------------------------------------+
The name of the external protocol should be typed in under the
"Name" heading as you would like it to appear in the MyComm
Upload and Download protocol selection menus.
In the fields for Upload.Bat and Download.Bat you will enter
the names of the DOS batch files that will be used to run the
MyComm Version 2.20 Documentation Page 44
external protocol. External file transfer protocols are run as
DOS batch files from MyComm (see your DOS manual for information
on batch files).
In the selection marked "Ask FileName" tells MyComm whether you
should be asked the name of the file when performing downloads
(some file transfer protocols automatically get the filename for
you).
MyComm sends the COM Port number you are using, the Baud Rate,
and the Drive:\Path\ and filename as parameters for the batch
file. Using the example above, let's say you are using an
external protocol called "BigFast", your COM Port is 2, the Baud
Rate is 2400, and your upload directory is "C:\PUBLIC\" and you
are uploading a file called MYSTUFF.ARC. The batch file for
Uploads with BigFast would look something like this:
REM BigFast Upload batch file
BigFast Send Port: %1 Baud: %2 %3
the %1 would be replaced by a "2", the %2 by "2400", and the %3
would be replaced with the name of the upload directory and the
filename: "C:\PUBLIC\MYSTUFF.ARC" when MyComm calls the .BAT file
to run.
External file transfer protocols often differ quite a bit, but
they usually come with enough documentation of their own to get
you going.
NOTE: Experience has shown that some external protocol drivers
may not release the COM port properly when they have completed
their business. This causes the terminal to appear "locked" (no
characters come across the scree). MyComm attempts to restore
the COM port after the external protocol has been called. If
your terminal appears locked the COM port can be reset by using
the <ALT> + P function from the terminal window.
3.20.4 Miscellaneous Options Setup
The Miscellaneous Options Setup screen (see example below) lets
you set up special options for MyComm.
MyComm Version 2.20 Documentation Page 45
+------------------------------------| Misc. Options Setup |+
| |
| Screen Background Color: Black |
| Screen Text Color: Gray |
| Date Format Style: MMDDYY |
| 12 or 24 Hour Time Format: 12 Hour |
| Make Noise When Calls Connect?: Yes |
| Make Noise After File Transfers: Yes |
| Use Direct Video? (Faster): Yes |
| Your Name for sign on : Your Name^M |
| Password for sign on : Password^M |
| Clever quip for TagLine: Witty quote goes here... |
| Guess Up/Download Filenames: Yes |
| |
| Use Up and Down Arrows to move between items |
| Hit <Enter> to edit, <Esc> to Quit |
+-----------------------------------------------------------+
3.20.4.1 Screen Background Color
This option tells MyComm what color to use for the screen
background color. This option only affects the screen of the
terminal window.
3.20.4.2 Screen Text Color
This option tells MyComm what color to use for the screen
foreground (the text) color. This option only affects the screen
of the terminal window.
3.20.4.3 Date Format Style
You may choose three date formats for MyComm to use when it
displays dates: MM/DD/YY, DD/MM/YY, or YY/MM/DD. Choose
whichever one best fits your mood.
3.20.4.4 12 or 24 Hour Time Format
MyComm will display the time in either 12 hour or 24 hour
format. Choose the one that bests reflects how you identify with
time.
MyComm Version 2.20 Documentation Page 46
3.20.4.5 Make Noise When Calls Connect
MyComm sounds a short alarm noise when a connection is made
during dialing. If you don't want MyComm to sound the alarm, set
this option to "No".
3.20.4.6 Make Noise After File Transfers
MyComm sounds a short alarm noise after a file transfer has
completed. If you don't want MyComm to make the noise, set this
option to "No".
3.20.4.7 Use Direct Video
MyComm by default uses a system called "direct video" when
displaying information to the screen. Unfortunately, direct
video will often "bleed through" to other programs in a
multitasking environment. If you are using a multitasker and
getting bleed through from MyComm, set the Direct Video option to
"No".
3.20.4.8 Your Name for sign on
This option lets you enter the name that you log on with when
you call systems. When bulletin board systems answer your call
they usually ask for your name and password. This name becomes
the default for "Logon Name" for new numbers you add to the
dialing directory. If Logon Name is filled in MyComm will send
your logon name to systems when you push the <F2> key to save you
some typing.
3.20.4.9 Password for sign on
This option lets you enter the password that you log on with
when you call systems. When bulletin board systems answer your
call they usually ask for your password. This password becomes
the default for "Logon Password" for new numbers you add to the
dialing directory. If Logon Password is filled in MyComm will
send your logon password to systems when you push the <F3> key to
save you some typing.
MyComm Version 2.20 Documentation Page 47
3.20.4.10 Clever quip for TagLine
Many BBS's have message areas where you can converse with other
people. If you want to be able to sign your name, leave a witty
quote or whatever without typing it over and over for each
message fill this area in. When you press the <F4> key MyComm
will send the message you have entered here. The message can be
up to 40 characters long. You may also send ANSI "Escape"
sequences (see DOS manual) from the Tagline.
If you want to send the ASCII "ESCape character (27 decimal, 1B
hex) which usually precedes ANSI escape sequences, MyComm uses
the characters "^[ ". ("caret" sign left bracket). For example,
the ANSI.SYS driver recognizes the string
<Esc>[5mThis is blinking<Esc>[0m
as a string that blinks. (note: <Esc> represents the 27 decimal
(1B hex) character here). So, if your Tagline looked like
^[[5mThis is blinking^[[0m
the other system would display "This is blinking" as a blinking
message line.
3.20.4.11 Guess Up/Download Filename
By default MyComm tries to "guess" the filename that you want
to upload or download. MyComm will make a best guess as to what
you most recently typed that looked like a filename. Having this
option set to "Yes" can save you time and typing when performing
file transfers.
3.20.5 COM Port Addresses
This option enables changes to the COM port addresses. By
default MyComm uses standard addresses and Interrupt Request
Lines (IRQ) to communicate with your modem. Most users will
never have a need to use this option. It is most commonly used
when there is a conflict with a mouse or other serial device and
the modem. By changing the base address and IRQ line this
problem can often be alleviated. Modifying the COM port address
table and IRQ settings can be tricky. If you are not entirely
certain that you know what you are doing this option is best left
alone.
You will see a table with the COM port number, the base address
it is using, and the IRQ line. You move from field to field by
pressing the <Enter> key. The base address is displayed in and
MyComm Version 2.20 Documentation Page 48
should be entered as a hexadecimal number. The IRQ line will
take numbers between 2 and 7.
After you make changes you will have to reinstall the COM port.
This is done by going back to the main terminal window and
pressing <Alt> and 'P' and following the "Change Port" menu.
3.20.6 Restore to Defaults
This option will reset the MyComm configuration information to
it's defaults. A message will appear warning you of this, and a
second "Yes/No" screen will ask if you want to proceed. The
changes take effect immediately, but are not saved until you use
the "Save Setup" option.
3.20.7 Save Setup
This option saves the changes you made to the various
configuration items to the file MYCOMM.CFG. If you make changes,
but do not save them, the changes will only remain active until
you exit from MyComm.
3.21 Send Screen to File - Alt W
Pressing the <ALT> and the "W" key takes a "snap shot" of the
currently displayed terminal screen and writes it out to the file
MYCOMM.SCR. The resulting file will contain the text currently
on the screen.
3.22 Exit MyComm - Alt X
Pressing the <ALT> and the "X" key brings up a message box that
takes a Yes/No response. Press "Y" to exit MyComm, or "N" or
<Esc> to cancel.
3.23 Help Screen - F1
When you are in the main terminal window pressing the F1 key
will show you a list of MyComm commands that are available to
you.
MyComm Version 2.20 Documentation Page 49
3.24 Send Name - F2
When bulletin board systems answer your call they usually ask
for your name and password. This option sends the name that you
log on with when you call a system if your name is filled in for
the dialing directory entry for the system.
3.25 Send Password - F3
This option sends the password that you log on with when you
call a system. See also "Send Name" above.
3.26 Send Tagline - F4
This is used to sign your name, or put a short quote, up to 40
characters at the end of a message. This is set up in the
"Miscellaneous Options Setup" screen.
3.27 Transferring Files
MyComm has a wide variety of built in file transfer protocols
such as Zmodem, Xmodem, Xmodem-1K, Ymodem Batch, Ymodem-G Batch,
SEAlink, Kermit, and of course ASCII. There are also slots to
include up to six external file transfer protocols if you would
like to add more.
You may Upload (send) files or Download (receive) files. Most
host systems will have you start the file transfer at their end
first, and then wait for you to set up on your end. Host systems
usually wait about a minute or so for you to set up, so don't
panic.
All file transfer protocols on MyComm use 8-N-1 (8 data bits,
No parity, and 1 stop bit). MyComm automatically sets these
settings for you before the file transfer begins, then switches
back to what ever settings were in place before the transfer
began.
Except for ASCII file transfers, MyComm turns off the XON/XOFF
flow control switch if you have it set on. This is done to
prevent the XON/XOFF codes as being mistaken as part of the
incoming file. The original state of the XON/XOFF flow control
is restored at the end of the file transfer. If your modem has
its own built in XON/XOFF flow control setting, you should turn
it off during file transfers (refer to your modem manual -
usually the &K option).
MyComm Version 2.20 Documentation Page 50
File transfers differ slightly from one host system to another.
Basically you need to know three things:
■ whether you want to Upload (send) or Download (receive)
a file
■ the name of the file you want to send or receive
■ which file transfer protocol you want to use
Probably you can figure out for yourself whether you are
uploading or downloading from a system, and what the file name is
that you want to transfer. However you and the host system MUST
use the same file transfer protocol or the transfer will fail.
The tricky part sometimes is deciding which file transfer
protocol to use. There are so many!
Actually it's easy to decide which file transfer protocol you
want to use. When you request a file transfer from the host
system, they usually show you a list of file transfer protocols
that their system supports. Just pick one that both MyComm and
the host system support, and you're on your way!
The two most frequently used protocols are Xmodem and Zmodem.
A little experimentation on your part will help you decide which
of the file transfer protocols best meets your needs.
A description of each of the file transfer protocols that
MyComm supports will be found later in this section.
3.27.1 Starting a File Transfer
The steps to start the file transfer from your end with MyComm
are simple:
■ Press PgUp to send files, or PgDn to receive files
■ Choose the file transfer protocol you want to use from
the menu
■ Type in the filename (if needed)
■ The file transfer will start and display a status
window
■ When the file transfer completes MyComm makes a noise
MyComm's file transfer menus and screens look basically the
same for both uploads and downloads. When you press PgUp or PgDn
a menu pops up showing you the different file transfer protocol
MyComm Version 2.20 Documentation Page 51
options you have (see example below). Pick a protocol, or press
the <Esc> or "Q" key to cancel.
Download Protocol Menu Example
+------| Down Load |+
| ASCII |
| SEAlink Derived |
| Xmodem |
| 1K-Xmodem |
| Real Ymodem Batch |
| Ymodem Batch - 1K |
| Zmodem |
| Kermit |
external protocol ==> | 1: BIGFAST |
(example) | Quit/None |
+-------------------+
After you pick a file transfer protocol, MyComm will ask you
for the filename that you want to send or receive. Some of the
file transfer protocols for receiving files, such as Ymodem Batch
and Zmodem, don't need to ask you the file name so you may not
always be asked for a filename. MyComm ALWAYS asks for the
filename when you upload files.
Note:
When you upload files with the "batch" protocols you may also
use the DOS "wildcard" characters for filenames such as *.* or
ALL*.ARC, or FILE??.*, etc.
If the filename, or the path to the file (the directory) are
invalid or can't be found you will see an error message and you
may re-enter the filename. If you want to exit without
performing the file transfer press the <Esc> key.
When the filename is entered correctly MyComm will start the
file transfer and the File Transfer Status Window shown below
will pop up.
Download/Upload Status Window
MyComm Version 2.20 Documentation Page 52
+------------------------------------------| Ymodem Download |+
| |
| Receiving: D:\PUBLIC\SOMEFILE.EXT |
| ----------------------------------------------------------- |
| |
| Xfer Time: 0:04:18 Bytes Received: 14567 |
| Elapsed Time: 0:01:18 Bytes Expected: 58645 |
| Approx. CPS: 186 Blocks Sent: 114 |
| ----------------------------------------------------------- |
| |
| Error Count: 0 Error Correction: CRC-16 |
| Last Error Message: Receiving File |
| |
+-------------------------------------------------------------+
The status window displays information about the file transfer
such as the file name being sent/received, an estimate of how
long it will take to do the transfer, the elapsed time, the CPS
rate (Characters Per Second), the bytes sent/received, the blocks
sent, error correction type, and error status.
Note:
Some protocols will not tell you the Xfer Time or the Bytes
Expected during downloads. This is because some protocols do not
send an information "header" packet that tells MyComm how many
bytes to expect from the sender.
When MyComm calculates the amount of time a transfer will take
it does the calculation based on a "worst case" rate of 80%
efficiency. This is to take into consideration possible line
noise, packet resends, and other considerations. Actual file
transfers may be faster than what MyComm calculates.
The CPS rate reflects only the number of bytes actually
sent/received from/to the file. Overhead bytes such as CRC and
"escape" characters are not included in the calculation. This
provides a more realistic picture of the file transfer progress.
MyComm Version 2.20 Documentation Page 53
3.27.2 File Transfer Hints
■ Both the sender and receiver MUST use the same file
transfer protocol
■ If a file transfer keeps aborting using one protocol on
a host system, try using a different one.
■ It is not a good idea to upload or download from floppy
disk. Floppy drives are slow, so the read and write
access time will slow down the transfer. Floppy drives
do not hold very much data. If the floppy disk were to
fill up during a download, the transfer would be
aborted.
3.27.3 Download Files - PgDn
Pressing the PgDn (Page Down) key starts the file download
procedures previously discussed.
3.27.4 UpLoad Files - PgUp
Pressing the PgUp (Page Up) key starts the file upload
procedures previously discussed.
3.27.5 ASCII File Transfers
ASCII file transfers are only used to transfer text files.
Program files, also known as binary files, should not be
transferred as ASCII files. ASCII uploads do not show the File
Transfer Status Window unless you have set the "Show Upload"
option to "No" in the ASCII Xfer configuration menu. ASCII
transfers have no error correction, but just plough along as
though the characters were actually being typed from the
keyboard. This is commonly referred to as a "send and pray"
protocol.
During ASCII downloads, the download continues until either a
Ctrl-Z (end of file marker) is received, or no characters have
been received for 10 seconds. You may also stop the transfer at
any time by pressing the <ESC> key.
MyComm Version 2.20 Documentation Page 54
3.27.6 SEAlink Derived File Transfers
SEAlink is an advanced version of Xmodem developed by System
Enhancement Associates. SEAlink uses a "sliding window" protocol
which sends ahead several packets while waiting for an
acknowledgement from the receiver. This can result in transfers
that are 10 to 20 percent faster than plain Xmodem. SEAlink
sends the file name and file size when the transfer starts up,
and can be used to send more than one file at a time.
The version of SEAlink that MyComm uses is known as "Derived
SEAlink" as MyComm does not support the "overdrive" option which
is only used in half-duplex links.
3.27.7 Xmodem File Transfers
Xmodem is probably the most widely used protocol today. Xmodem
was originally developed by Ward Christensen in the summer of
1977 for use on CP/M machines, and was soon ported to the MS-DOS
environment. Xmodem sends data in 128 byte blocks. The block
count seen in the File Transfer Status Window shows the number of
128 byte blocks that have been transferred. This has
euphemistically been called "Xmodem blocks" and has become
somewhat of a standard in P.C. data communications.
Xmodem has two flavors; Check Sum and CRC-16 mode. MyComm
supports both Check Sum and CRC-16 mode, and automatically
selects the correct one to use. The check sum mode is not nearly
as reliable as CRC-16, and isn't used as often.
3.27.8 1K-Xmodem File Transfers
Xmodem-1K is a variation of Xmodem which uses a 1K (1024 byte)
block to send data. Under most conditions Xmodem-1K is slightly
faster than plain Xmodem. If there is a lot of line noise
however, the throughput can degrade due to having to perform a
resend on the larger packet.
Some older host systems may refer to Xmodem-1K as "Ymodem" so
read the host system menu carefully.
MyComm Version 2.20 Documentation Page 55
3.27.9 Ymodem Batch File Transfers
The Ymodem Batch protocol can perform either single or batch
file transfers. That is, it can send or receive one or more
files in a transfer session. Ymodem Batch starts sessions by
sending the file name and size to the receiver, then sends the
file data. Ymodem uses both a 128 byte or 1024 byte (1K) packet
size and MyComm chooses the correct packet size to use during the
transfer.
3.27.10 Ymodem-G Batch File Transfers
The Ymodem-G Batch protocol is similar to the regular Ymodem
Batch protocol. The difference is that Ymodem-G performs no error
correction what-so-ever and as such it is generally only used
with error correcting modems, or Null modem cables. If an error
is detected during a transfer, the transfer is immediately
aborted.
3.27.11 Zmodem File Transfers
Zmodem is another widely used file transfer protocol. It was
developed by Chuck Forsberg/Omen Technology, Inc. Zmodem is an
extremely robust protocol as it recovers from errors well and
will try to keep the file transfer session going under adverse
conditions.
Zmodem will perform both single file and batch (multiple) file
transfers. Like Ymodem, when receiving a file using Zmodem, you
don't have to type in the file name on your end. Zmodem sends
the filename as part of a special "header" that MyComm
recognizes.
Zmodem uses either a 16 bit or 32 bit CRC (Cyclic Redundancy
Check) when transferring the file. You will see the CRC type
displayed in the File Transfer Status Window. The CRC is used
for error checking during the transfer. MyComm automatically
selects the proper CRC type to use so you don't have to worry
about it. The 16 bit CRC transfers often go a little faster than
32 bit CRC transfers. However the 32 bit CRC is much more
reliable for error correction, and well worth the few seconds
added to the transfer time.
MyComm Version 2.20 Documentation Page 56
3.27.12 Kermit File Transfers
The Kermit file transfer protocol is widely used in many
environments in particular mainframes and mini mainframes.
Kermit was designed to allow many different types of machines to
send data to each other. In order to do this Kermit places a
special "escape" character before any control characters
encountered. However this compatibility does have its price,
Kermit is one of the slowest protocols in use today. Because of
the slow file transfers Kermit should be used when there is no
other protocol available. The Kermit version in MyComm supports
the "basic" Kermit protocol.
3.27.13 External Protocol File Transfers
MyComm lets you define up to six external file transfer
protocols. The external file transfer protocols will also appear
in the Upload and Download protocol selection menus.
External protocols are set up in the External Protocols Setup
(see section 3.20.3.3 "External Protocols Setup"). External
protocols differ from vendor to vendor, so you should refer to
the particular protocol's documentation for more detailed
installation instructions. MyComm invokes the external protocols
through the use of DOS "batch" files. Parameters are passed to
the batch file in the following order: COM Port number (0 to 7),
BPS rate, and Drive:\Path\Filename which translate to batch
parameters %1, %2, and %3.
3.27.14 MyComm as a Host
At this point in time MyComm does not have a "host" mode per
Se. This was a design decision in order to keep the code size
small. However, there is a file called MCHOST.SCP which is a
MyComm script that will perform very simple host functions. The
MCHOST.SCP file may be used as an example to create your own host
scripts as well. Please note that MyComm is not intended for use
as a BBS, but the MCHOST.SCP should provide enough functionality
for simple file transfers. See also Appendix E - Script
Language.
It is also possible to transfer files between two MyComm
programs (or MyComm and another communication program) without
the use of a special script file. To do this one person acts as
the "host", and the other as caller. As the caller you would
just call the other person as you would for any other bulletin
board system.
MyComm Version 2.20 Documentation Page 57
For this example, let's say you're the host since that's the
complicated part.
Step 1: Prearrange a time for the other person to call you.
Step 2: Get MyComm up and running.
Step 3: When the other person calls you will hear the phone
ringing or see the word "RING" appear on the MyComm
terminal screen. When you see "RING", type ATA then
press the <Enter> key. This tells your modem to answer
the phone and initiate the carrier tones so the two
modems will "talk" to each other. Alternatively you
could press <Alt> and the "I" key, then press "A" for
the "Send Answer String" command.
Step 3a: Alternative to Step 3: before the other person calls
type ATS0=1 then press <Enter>. This tells your modem
to answer the modem on the first ring and to initiate
the carrier tones.
Step 4: When transferring files from one MyComm to another
remember that when they are uploading, you are
downloading and vice versa. So if the other person
wants to download a file from you they would start the
download function at their end, and you would start an
upload from your end. The most important things to
decide before doing the transfer are:
- who is uploading/downloading to and from who
- which file transfer protocol you are using (they
MUST be the same)
- and finally, what the filename is.
Step 4a This is where the MyComm "chat" mode can be handy. It
can help you establish stuff while you're on-line with
the other person. If you would like to "chat" on-line
with the other person, Press <Alt> and the "A" key to
bring up the MyComm split screen chat mode (see section
3.3 "Chat Mode").
Step 5: If all goes smoothly the file transfer will be
successful. In fact for the most part it will be as
though you had simply called another BBS, except this
time you're interacting with a live person rather than
the BBS software.
Appendix A - MyComm Command Summary
Alt A - Chat Mode
Alt B - Send Break
Alt C - Clear the Screen
Alt D - Dialing Functions
Alt E - Local Echo On/Off
Alt H - Hang Up Modem
Alt I - Send Modem Initialization Strings
Alt J - Join Script (Run a Script)
Alt L - Present Line Status
Alt K - Scroll Back
Alt M - Manual Dial
Alt O - Outside to DOS
Alt P - Change Port Parameters
Alt Q - Quick Re- Dial
Alt R - Run External Program
Alt S - Session Capture On/Off/Pause
Alt T - Terminal Emulation
Alt U - Update Configuration
Alt W - Send Screen to File
Alt X - Exit MyComm
F1 - Help Screen
F2 - Send Name
F3 - Send Password
F4 - Send Tagline
PgUp - Upload Files
PgDn - Download Files
Appendix B - MyComm Line Editing Functions
Many of the user configuration options and the dialing list
have sections that require a line of text to be input and edited.
MyComm has a built in line editor to perform simple editing on
these text lines. The MyComm line editor uses a tiny subset of
WordStar type commands. A description of the line edit commands
follows.
■ Enter - Terminates editing the line and keeps it
■ Esc - Terminates editing the line and does not keep
it
■ Right Arrow - Moves the cursor right.
■ Left Arrow - Moves the cursor left. This is "non-
destructive", the character is not erased as
the cursor moves
■ BackSpace - Moves the cursor left. This is
"destructive", the character is erased as the
cursor moves
■ End - Positions the cursor at the end of the line
■ Home - Positions the cursor at the beginning of the
line
■ Ctrl + T - When the Ctrl key and the letter T are
pressed simultaneously, the line is erased
from the current cursor position to the end
of the line
■ Ctrl + Y - When the Ctrl key and the letter Y are
pressed simultaneously, the entire line is
erased and the cursor is positioned at column
one
Appendix C - Terminal Emulation
This is a list of the functions that MyComm supports in the
terminal emulators.
TTY Terminal Emulation
TTY does not provide any character translation what-so-ever.
The characters are simply displayed as they come in.
ANSI Terminal Emulation
ANSI provides mapping similar to that found in your ANSI.SYS
driver. The color and screen attributes as described in the
"MS-DOS 5.0 User's Guide and Reference" are supported, except for
the keyboard mapping functions. The following keys also generate
codes recognized by other systems operating in ANSI mode:
Direction (Arrow) Keys - move cursor
Delete - sends DEL (127 decimal)
End - erase to end of line
Home - homes cursor
Ctrl-Home - clears screen, and homes cursor
Function Keys - do not generate a character
VT-52 and VT-100 Terminal Emulation
The VT-52 and VT-100 emulations are typically used with
mainframe environments. These emulations provide a subset of the
"application keyboard" functions defined in the "VT-200
Programmer Guide", Digital #EK-VT220-HR-001. These emulations
will work in either a 7 or 8 bit environment. A standard key pad
for these terminals looks like this:
+-----------------------+
| PF1 | PF2 | PF3 | PF4 |
|-----+-----+-----+-----|
| 7 | 8 | 9 | - |
|-----+-----+-----+-----|
| 4 | 5 | 6 | , |
|-----+-----+-----+-----|
| 1 | 2 | 3 | R |
|-----------+-----| T |
| 0 | . | N |
+-----------------------+
MyComm defines these keys as follows:
PF1 through PF4 - <SHIFT> + F1 through F4
1 through 0 - <ALT> + F1 through F10
Minus Sign "-" - <SHIFT> + F5
Comma "," - <SHIFT> + F6
Decimal Point "." - <SHIFT> + F7
RTN (Enter key) - <SHIFT> + F8
NOTE: the above keys are the function keys on a standard PC
keyboard. The PC numeric keypad has not been mapped to these
keys.
Also defined:
Direction (Arrow) Keys - move cursor
Delete - sends DEL (127 decimal)
End - erase to end of line
Home - homes cursor
Ctrl-Home - clears screen, and homes cursor
3270 Terminal Emulation (Registered version only)
This emulation is most commonly used when connecting to IBM
mainframe hosts. This emulation should be used instead of VT-100
emulation when connecting through the 7171 protocol converter.
This emulation works best with 101 key PC keyboards (to get the
PF11, PF12, PF23, and PF24 keys). The mapping to the PC keyboard
follows.
PC Keypad Alternate 3270 emulation
<Shift> + F1 PF1
... ...
... ...
<Shift> + F10 PF10
<Shift> + F11 <Esc> + - PF11
<Shift> + F12 <Esc> + = PF12
<Alt> + F1 PF13
... ...
... ...
<Alt> + F10 PF22
<Alt> + F11 <Esc> + _ PF23
<Alt> + F12 <Esc> + + PF24
<Ctrl> + F1 PA1
... ...
... ...
<Ctrl> + F4 PA4
Arrow Keys Arrow Keys
Insert Toggle Insert
<Shift> + <Tab> Back Tab
<Ctrl> + <Left Arrow> BackSpace
Home Home
Delete DEL
<Ctrl> + Home CLEAR
End Erase to End of field
<Ctrl> + End Line Feed
Appendix D - Troubleshooting
This section should answer common problems that you might have
when using MyComm.
Problem:
- Modem doesn't respond.
Possible Causes:
- Is the COM port the right one? i.e COM 1, 2, 3, 4, 5, 6, 7,
or 8.
- Is the modem installed correctly?
- Is the modem really Hayes (Tm) compatible?
- If this is an external modem, are the cables hooked up?
Is it plugged in?
- MyComm uses default address and interrupt vectors for COM
Ports of:
COM Port Address IRQ Line
1 3F8 4
2 2F8 3
3 3E8 4
4 2F8 3
5 3E8 2
6 2F8 2
7 3E8 5
8 2F8 5
If you have set these to something different, MyComm
probably won't like it. Reset the interrupt vectors to their
standard settings. If you don't know what this means, you
probably didn't fool with it in the first place, so don't mess
with it now.
MyComm allows user configuration of addresses or interrupt
vectors on the COM ports. See the section "COM Port Addresses"
for more information.
Problem:
- Modem won't hang up the phone line.
Possible Causes:
- Some modems have a DIP switch setting that keeps Carrier
Detect always on. MyComm uses the Carrier Detect signal
(CD) to see if it's on-line, and to see when the modem has
released the phone line. You should set your modem to let
software, in this case MyComm, to handle the Carrier Detect
signal.
- Try adding the Hayes command &C1 to your initialization
string. This tells the modem to raise Carrier Detect only
when connected.
Problem:
- Modem dials, but doesn't know when the connection is made.
Probable Causes:
- Make certain that the modem is sending text responses rather
than numeric. Add "Q0" and "V1" to your modem
initialization string.
- Go into the "Modem Setup" screen and check the "Connect
Strings" setting. Make sure that they look like the ones
your modem usually generates.
Problem:
- The result codes from the modem are numbers instead of
text.
Possible Causes:
- Try adding Q0 and V1 to the modem initialization string.
MyComm MUST see the result codes, and they have to be the
English Text. Also try adding X4 to the initialization
string.
Problem:
- When using a multitasker such as Windows (Tm), DoubleDOS
(Tm), etc, the MyComm displays bleed through to other
applications.
Possible Causes:
- Set the option in the Miscellaneous Options Screen named
"Direct Screen Writes" to "No".
Problem:
- When I call some services, the characters look weird, or
just garbage.
Possible Causes:
- Make sure that the Baud Rate, Data Bits, etc. are set
correctly. Most public BBS's use 8-N-1, but some may use 7-
E-1 (often true with Unix (Tm) based systems and
mainframes).
- Are you using the correct terminal emulation? See <ALT> +T
command.
- This is sometimes caused by a COM port or IRQ line conflict.
If another serial card or device is on the same COM port or
IRQ line you may experience dropped characters, weird things
happening during file transfers and other problems. See also
question # 1 above.
Problem:
- File transfers seem to always time out or abort.
Possible Causes:
- MyComm will abort a transfer if there are too many errors in
the transfer due to line noise, or other unpredictable
circumstances.
- Are you and the other guy are using the same file transfer
protocol?
Appendix E - MyComm Script Language
1.0 Script Language Introduction
This Appendix describes the format and syntax of the script
language used by MyComm. The MyComm script language is a series
of commands in a text file that is read by MyComm to perform
certain functions. For example, a script function could send
your name and password automatically when you log onto a system,
then perform steps to navigate through the host system menus to
gather your mail for you and then log off.
The script language used in MyComm consists of 22 commands that
are used to build scripts. The script language is very simple,
yet very powerful. It is designed in such a way that ordinary
people rather than programmers or technicians will find it easy
to use and understand. MyComm's script language should be no
more difficult to use than writing DOS batch files.
1.2 Creating a Script
Scripts are created using a line editor, text editor, or word
processing software that can save files as plain unformatted
text. It is similar to creating DOS "batch" files.
To Create a Script
Step 1: Log onto the BBS or system that you want to create a
script for. As you log on write down the sequence of
questions and responses that you receive and send. For
example if the host system has a prompt that says
"Enter your Name:" and you type in your name at that
point, write down the question asked by the host system
and your response. Optionally you may turn on the
Session Capture (ALT + "S") to save your responses for
later referral.
Step 2: Log off the BBS or system. No sense in tying up their
line.
Step 3: Use your text editor to write the script file. The
script commands that MyComm understands are described
later in this Appendix. The script file must be saved
to the same directory that the MyComm program is in
(for example C:\MYCOMM) so that MyComm can find it
later.
Step 4: Test your script with the MyComm Script Checker,
SCP_CHK.EXE (described later in this Appendix). Revise
the script and re-test as necessary.
Step 5: Go to the Dialing Directory and edit the dialing entry
for this BBS. There is an option called "Scripts".
Add the name of your script file here.
Step 6: Call the BBS and test your script. Sometimes it may
take more than one try to get it all right. Don't
worry, it happens to us all.
2.0 Script Language
The MyComm script language consists of 22 commands which will
be described shortly. The script files that you create must have
the file name extension .SCP, and must be saved in the same
directory that MyComm is in. For example if you created a script
for MyBbs, the script file would be named MYBBS.SCP.
This manual will use the following conventions to describe the
functions and the parameters that they take:
FUNCNAME() Function name is all CAPS. Please note that
no function name is over eight characters
long. All functions have the parameters
enclosed with parenthesis. The parameters
are separated with commas.
<int> Integer parameter.
<"string"> String parameter. Please note that all
incoming and outgoing strings may be a
maximum of 60 characters in length. Strings
are case sensitive, "PassWord" and "password"
are different strings! Also note that the
strings are enclosed in quotes. Since commas
are used as parameter delimiters, strings
must not contain embedded commas!
<op1|op2|...> Operator parameter. Some functions use an
operator.
<"label"> Label name.
<Sn> Parameter may be one of the string flags S0
through S9.
<In> Parameter may be one of the integer flags I0
through I9.
(optional) Indicates the next parameter is optional
<"string"|Sn> Parameter may either be a string constant or
one of the string flags.
:label Label within the script file. All labels are
preceded by a colon ':' character. Labels
may be up to eight (8) characters.
comments Comments are preceded by a semi-colon ';'.
The comments are free form and may be placed
anywhere. The rest of the line after the
semi-colon is ignored by the script.
The script functions are described in the following sections.
The format of the descriptions is the function name, the
parameter it takes, and a description. For example:
WAITFOR(int waitsecs, "string"|Sn, (optional) "label"|Sn)
indicates that the WAITFOR function takes an integer parameter, a
string or "S" flag parameter, and an optional string or "S" flag
parameter.
2.1 Special Script Characters
There are several special characters that MyComm will interpret
for you when they are put into strings that you are sending to
the host system:
^M ("caret" sign and capital "M") This character sequence
sends a "carriage
return", as though you
had pressed <Enter> on
the keyboard.
^[ ("caret" sign and left bracket "[") This character sequence
sends <Esc> as though you
had pressed <Esc> on the
keyboard.
~ (tilde) - This character causes a
100 millisecond delay.
2.2 Script Functions
The next section describes the various script functions that
are available.
2.2.1 Labels
Labels are used to produce logical execution branches within
the script file. Labels are used with the GOTO(<label>) function
as well as several other functions which will branch when a
condition is met.
2.2.2 WAITFOR()
format: WAITFOR(int waitsecs, "string"|Sn, (optional) "label"|Sn)
WAITFOR() will wait up to <int> seconds for <string> and goto
<label> if the <string> is received. If the <string> is not
received the next line in the script is executed. Note that
<label> is optional in which case the next line in the script
would be executed regardless.
For example if you wanted to wait 30 seconds for the string
"PassWord" then jump to the label :GotPass
WAITFOR(30, "PassWord", "GotPass")
would do it.
2.2.3 XMIT()
format: XMIT("string"|Sn)
Transmit a "string". For example:
XMIT("password")
would send the string "password".
If the LOCLECHO() function has been set to "Yes" the characters
sent by XMIT() will also be shown on your local screen. This may
be useful when the other system is not echoing characters back to
you.
2.2.4 GOTO()
format: GOTO("label"|Sn)
Jump to :label. For example, if you have the label ":Lab001" in
your script, GOTO("Lab001") would jump to that label. Script
execution resumes at the line after the label.
2.2.5 SETFLAG()
format: SETFLAG(In, int value)
Set integer flag to a value. The flags are referenced as flag 0
through 9. The flags can take on values between -999 and 9999.
This function has the following format:
For example to set flag 1 to 42:
SETFLAG(I1, 42)
2.2.6 INCFLAG()
format: INCFLAG(In)
The flags that were set (see SETFLAG() above) may be
incremented by 1. To increment flag 1:
INCFLAG(I1)
2.2.7 DECFLAG()
format: DECFLAG(In)
The flags that were set (see SETFLAG() above) may be
decremented by 1. To decrement flag 1:
DECFLAG(I1)
2.2.8 IFFLAG()
format: IFFLAG(In, <EQ|GT|LT|GE|LE|NE>, int value, "label"|Sn)
The integer flags may be tested for logical conditions. If the
condition is met script execution continues at the statement
following the label. The test condition operators are:
EQ - equal
GT - greater than
LT - less than
GE - greater than or equal
LE - less than or equal
NE - not equal
If you wanted to test to see if flag 1 was EQual to 42, then jump
to label :Lab001 you would enter:
IFFLAG(I1, EQ, 42, "Lab001")
NOTE: Quote characters are not used around the operators.
2.2.9 IFSCAN()
format: IFSCAN(Sn, "string"|Sn, "label"|Sn)
You may set up to ten scan strings to continuously scan for.
When the scan condition is met script execution continues at the
statement following the label. For example if you wanted to scan
for the string "John Doe" and then jump to the label :Lab001 when
it was found:
IFSCAN(S1, "John Doe", "Lab001")
IFSCAN() recognizes S0 through S9 as valid flag names. The
IFSCAN() function can be reset to scan for a new string by re-
using the string variable. For example:
IFSCAN(S1, "Bob Public", "Lab001")
2.2.10 SENDNAME()
format: SENDNAME()
The SENDNAME() function will send the name that you have
defined in your dialing directory entry for the BBS that the
script is "Joined" to. SENDNAME() take no parameters. If the
name entry in the dialing directory is blank nothing is sent.
2.2.11 SENDPASS()
format: SENDPASS()
The SENDPASS() function will send the password that you have
defined in the dialing directory entry for the BBS that the
script is "Joined" to. SENDPASS() take no parameters. If the
password entry in the dialing directory is blank nothing is sent.
2.2.12 SENDFILE()
format: SENDFILE(<op> A|S|X|K|Y|G|Z, "filename"|Sn,
optional "path"|Sn)
The SENDFILE() function is used to upload a file to the host
system. You will have to take care of any preparatory steps
within the script, such as telling the host that you are sending
a file.
The parameters are a one letter designator for the protocol,
and a "string" or string flag (S0..S9) for the filename. By
default MyComm looks for the file that you are sending in the
"Upload Directory" that you have defined in MyComm. You may
specify a different directory path as the third parameter.
The valid operators for <op> are:
A - ASCII
S - SEAlink
X - Xmodem
K - Xmodem-1K
Y - Ymodem Batch
G - Ymodem-G
R - Kermit
Z - Zmodem
For example if you wanted to send the file "MYCOMM.ARC" using
Zmodem:
SENDFILE(Z, "MyComm.ARC")
- or -
SENDFILE(Z, "MyComm.ARC", "MYPATH")
2.2.13 RECVFILE()
format: RECVFILE(<op> A|S|X|K|Y|G|Z, optional "filename"|Sn,
optional "path"|Sn)
RECVFILE() allows you to receive files from the host system.
You will have to take care of any preparatory steps within the
script, such as telling the host that you want to receive a file.
See SENDFILE() (above) for the list of valid operators. By
default the received files are put into the "Download" directory
defined in MyComm, however files may be put into a different
directory by using the third optional parameter.
For example if you wanted to download the file "STUFF.ARC" using
Xmodem:
RECVFILE(X, STUFF.ARC)
- or -
RECVFILE(X, "MyComm.ARC", "MYPATH")
Please note that SEAlink, Ymodem, Ymodem-G, and Zmodem do not
require that a filename be specified. These protocols send the
filename in a special header. The ASCII, Xmodem, and Xmodem-1K
protocols always require that a filename is specified.
NOTE: if you have the Zmodem "Auto Download" feature turned on
there may be conflicts between the script Zmodem and the MyComm
Zmodem. If you have the Zmodem "Auto Download" feature turned on
in MyComm the Zmodem file transfer will start automatically, and
you will not need to use this function during Zmodem downloads.
2.2.14 SNDBREAK()
format: SNDBREAK(optional <int ms>)
SNDBREAK() sends a "Break" signal for 1500 milliseconds. It
will also take an optional parameter for the number of
milliseconds that the "Break" signal will be sent.
2.2.15 ALARM()
format: ALARM(optional <int ms>)
ALARM() will make a noise for <int> milliseconds. For example
ALARM(1000) would sound a beep for one second. The default alarm
duration is 500 milliseconds (1/2 second).
2.2.16 PAUSE()
format: PAUSE(int seconds)
PAUSE() will cause a delay for "seconds" seconds. For example
PAUSE(5) would pause the script for 5 seconds.
2.2.17 HANGUP()
format: HANGUP()
The HANGUP() function causes the modem to disconnect. HANGUP()
uses the information from the MyComm configuration file to send
the correct hang up string.
2.2.18 IGNORECD()
format: IGNORECD("Yes"|"No"|Sn)
This function "Ignore Carrier Detect" tells the script
processor to ignore the state of the "Carrier Detect" modem
signal. By default if the carrier signal is lost the script
exits. In some cases, such as while waiting for an incoming
call, it is useful for the script to continue execution even when
there is no carrier signal.
This function takes one parameter: a string of "Yes" or "No",
or one the string variables (S0..S9). A value of "Yes" turns off
carrier detect monitoring within the script, "No" turns
monitoring back on.
2.2.19 SETSTR()
format: SETSTR(Sn, "string"|Sn)
SETSTR() sets one of the string variables S0 through S9 to a
string constant or another string variable. For example:
SETSTR(S2, "This String")
would set string variable S2 to "This String".
Please note that the SETSTR() function resets the "goto" label
of the string variable if that same string variable was
previously assigned with the IFSCAN() function.
2.2.20 GOSUB()
format: GOSUB("label"|Sn)
The GOSUB() function is used to branch execution in the script.
It is similar to the GOTO() function except that later in the
script a RETURN() function may be used which will transfer script
execution to the statement following the last GOSUB(). For
example:
GOSUB("gosub1") ; go to label "gosub1"
<statement1> ; execution resumes here after RETURN()
<statement2>
...
<statement-n>
:gosub1 ; label for GOSUB() to go to
<statement1>
<statement2>
...
<statement-n>
RETURN() ; return to statement after GOSUB()
2.2.21 RETURN()
format: RETURN()
The RETURN() function returns script execution to the statement
following the most recent GOSUB(). See the description of the
GOSUB() function above for details.
2.2.22 EXIT()
format: EXIT()
The EXIT() function exits the script and return control back to
MyComm.
2.2.23 QUIT()
format: QUIT()
The QUIT() function exits from the script and MyComm
completely. Please note: QUIT() does not hang up the modem. If
you would like the modem to disconnect the HANGUP() function
should be used before QUIT().
2.2.24 COMPSTR()
format: COMPSTR("string"|Sn, "string"|Sn, "label"|Sn)
The COMPSTR() function compares two strings or string variables
and jumps to a label if the strings are equal. The comparison is
not case sensitive.
2.2.25 LOCLECHO()
format: LOCLECHO("Y"|"N")
This function turns the local echo on during script execution.
When the local echo is on anything sent with the XMIT() function
is echoed back to the local console. Additionally the PORTGET()
function (see below) echoes characters back to the other system.
2.2.26 IF()
format: IF("TRANSTAT"|"CARDET"|"NOCARDET"|"SUCCESS", "label"|Sn)
The IF() function tests one of the MyComm internal script flags
for a TRUE condition and then jumps to a label if TRUE. The
internal script flags are:
TRANSTAT - True if last file transfer was successful
CARDET - True if carrier detected
NOCARDET - True if no carrier detected
2.2.27 PORTGET()
PORTGET()
format: PORTGET(Sn, len, waittime)
The PORTGET() function waits up to "waittime" seconds to get up
to "len" characters from the COM port and put them into a string
variable. If the LOCLECHO() function has been activated the
characters are echoed back to the other system. This would be
useful for getting responses from someone who is calling you for
example. Note: only printable ASCII characters in the range of
20 hex to 7E hex (Space char through tilde) will be placed into
the string variable. Also note that receiving a "carriage
return" character (0D hex) will cause PORTGET() to exit with
whatever characters were received up to that point.
3.0 Script Syntax Checker
The program SCP_CHK.EXE is used for checking the syntax of
script files. To use the program to check a script file type:
SCP_CHK SCRIPT.SCP
Replace SCRIPT.SCP with your file name. Also the .SCP extension
is assumed and you may leave it off if you like. The output from
SCP_CHK will be display on the screen, or you may redirect the
output to a file. For example
SCP_CHK MYSCRIPT > MYSCRIPT.OUT
would create the file MYSCRIPT.OUT with all the error
information. This might prove useful if you have a long error
list.
The output from SCP_CHK will look something like this:
Line 3 ALARM - Error : too few arguments
This shows you the line number where the error occurred, the
function that caused the error, and the reason why it was an
error. The error messages are self explanatory. Simply re-edit
the script file and correct any errors. Run SCP_CHK again to
make sure that you caught all the errors.
4.0 Script Sample
This is a sample of a working script file that picks up mail at
a local BBS.
waitfor(180, "=no change?") ;get past opening screen
xmit("^M")
waitfor(30, "Do you want graphics")
xmit("Y^M")
waitfor(30, "your first name?") ;login
sendname()
waitfor(30, "Is this correct?")
xmit("Y^M)
waitfor(30, "Password")
sendpass()
waitfor(180, "Scan Message Base") ;get past local msgs
xmit("N^M")
waitfor(15,"Press (Enter) to continue?", jump1)
goto("nojump1")
:jump1
xmit("^M")
:nojump1
;at main menu now...
waitfor(60, "Command?")
xmit("open^M") ;get to door section
waitfor(30, "Enter the DOOR # to Open") ;open mail door
xmit("3^M)
waitfor(60, "mail Command?")
xmit("D^M") ;start mail gathering
waitfor(600, "receive these messages")
xmit("G^M") ;start mail d/l
;zmodem will auto start here
;download complete
waitfor(60, "Thank you for visiting") ;now logoff
hangup()
exit() ;exit the script
Appendix F - MyComm Order Form
MyComm Version 2.20 Order Form
Copyright (c) 1992 - 1994 - Ken Dorshimer
All Rights Reserved
Mail to:
Ken Dorshimer
P.O. Box 5143
Belmont, Ca. 94002
Your Name: _________________________________________________
Address: _________________________________________________
_________________________________________________
City: _________________________________________________
State: _________ Zip Code: _________________________
Disk Format: 5.25" floppy ____ OR 3.5" semi-floppy ____
Number of Copies of MyComm _______ X $25.00 = __________
Number of Copies of MyComm _______ X $2 S&H = + __________
Total: __________
Please make check or Money Order payable to Ken Dorshimer, and
send to the address above (mine not yours).
Funds should be in U.S dollars, and drawn on a U.S. bank.
(Please send check or money order, do not send cash. People
who want to order MyComm from outside the U.S. should obtain a
money order in U.S. dollars from a local bank).
Please note: I am not able to process credit card orders at
this time (several folks have asked me about this).
Appendix G - MyComm Bug Report Form
MyComm Version 2.20 Bug Report Form
This form may be used to describe any problems, or bugs that
you may have found with MyComm. You may also use it to describe
any enhancements you would like to see added to MyComm, or
suggestions for future versions.
Bug reports and suggestions are always welcome. Of course all
bug reports and suggestions get much closer scrutiny when
accompanied by a registration check <grin>.
----------------------------------------------------------
Machine Type __________________________ DOS Version ____
Machine BIOS Type _____________________ Monitor ________
Modem Brand __________________________ Speed ______
Describe problem, bug, or suggestion:
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
____________________________________________________________
Mail To:
Ken Dorshimer
P.O. Box 5143
Belmont, Ca. 94002
Appendix H - Planned Modifications and Upgrades
At this time I am planning (contingent on the number of
registrations of MyComm) to make several modifications and
upgrades to MyComm. Some of these are:
■ MS-Windows (Tm) and/or Deskview (Tm)
compatibility
■ Compuserve-B file transfer protocol
■ VT-200 Terminal Emulation (as well as some other ones
people have been asking about)
■ Script Language enhancements
Of course upgrades are dependent on you, the end user. MyComm
is user supported software. If I see that people are interested
in the program, and interested enough to register it, I will feel
more inclined to continue to perform upgrades to MyComm.
The creation and development of a program like MyComm is by no
means trivial. Continued user support in the form of
registrations gives me, your humble author, the incentive to keep
upgrading and improving MyComm.
Appendix I - MyComm Revision History
Note: Past versions of this section had every nuance of every
enhancement or bug fix listed. I have decided to only list the
enhancements that pertain to the current major release for
brevity.
September 19, 1991 - MyComm Version 1.0 design began
February 16, 1992 - MyComm Version 1.0 completed
March 18, 1992 - MyComm Version 1.10 completed
April 11, 1992 - MyComm Version 1.20 completed
May 9, 1992 - MyComm Version 1.22 completed
April 8, 1993 - MyComm Version 2.0 (Major revision)
June 19, 1993 - MyComm Version 2.01 (Bug fix)
July 7, 1993 - MyComm Version 2.02 (Bug fix)
August 8, 1993 - MyComm Version 2.1 (Enhancement)
November 11, 1993 - MyComm Version 2.11 (Maintenance release)
Nov. 93 - Jan 94 - MyComm Versions 2.12 - 2.14
were "registered" releases only
January 3, 1994 - MyComm Version 2.15 (Enhancement)
March 28, 1994 - MyComm Version 2.20 (Enhancement)
- Fixed some minor bugs and annoyances
- Enhanced script language
- Included Host Mode script
- Kermit protocol added
Appendix J - Control Characters
MyComm supports the sending of standard data communications
control characters. Control characters are preceded by the caret
character '^'. The caret denotes that the next character will be
a control character. For example ^M is the symbol for Carriage
Return or <Enter> which could be used to terminate your "Modem
Initialization String". The '^' stands for Ctrl, so sending one
of these sequences would be similar to pressing the <Ctrl> key
and the character 'M' simultaneously. The control characters are
especially useful when using the script language functions. For
example ^[ represents the ESCape character which is often used
to start a session on a BBS.
Please note that these control sequences are only interpreted by
MyComm when you are sending a string such as your "Modem
Initialization String", "Hangup String", etc. or with the XMIT()
function in the script language. A listing of commonly used
control characters follows.
Sequence Meaning
^@ NUL
^A SOH
^B STX
^C ETX
^D EOT
^E ENQuire
^F ACKnowledge
^G BELL
^H BackSpace
^I TAB
^J Line Feed
^L Form Feed
^M Carriage Return (Enter key)
^P DLE
^Q XON
^S XOFF
^U NAK
^V SYN
^X CANcel (often used for aborting file transfers)
^Z SUB (also end of file)
^[ ESCape
-D (Dial Command Line Parameter) 12
-J (Join Script Command Line Parameter) 12
-T (Timed Start Command Line Parameter) 13
1K-Xmodem File Transfers 54
3270 Terminal Emulation 62
Add LF after incoming CR 22
Add Phone List Item 17
ALARM() 73
Alt A 15
Alt B 16
Alt C 16
Alt D 16
Alt E 26
Alt H 26
Alt I 26
Alt K 28
Alt L 27
Alt M 28
Alt O 28
Alt P 29
Alt Q 29
Alt R 29
Alt S 30
Alt T 30
Alt U 30
Alt W 48
Alt X 48
ANSI Terminal Emulation 60
ASCII File Transfers 53
ASCII Transfers Setup 38
ASCII Transfers Setup Screen 39
Baud Rate 18
BS Key Sends BS or DELete 21
Bug Report Form 80
Call Numbers (Dial) 22
Caret Sign 83
Change Port Parameters - Alt P 29
Change Port Parameters Screen 29
Character Pace Time 40
Chat Mode - Alt A 15
CHDIR() 76
Clear last date called 22
Clear the Screen - Alt C 16
Clever quip for TagLine 47
COM Port 32
COM Port Addresses 47
Command Line Parameters 12
Command Summary 58
COMPSTR() 75
Connect Strings 36
CONSCLR() 76
CONSGET() 76
CONSLOC() 76
CONSMGET() 76
CONSMSG() 76
Control Characters 83
CR Translation Upload and Download 39
Data Bits 19
Data Parity 19
Date Format Style 45
DECFLAG() 70
Default Protocol 19
Definitions, Acronyms 5
Delete an Item 22
Dial Entries 12
Dial Prefix 19
Dial Screen 17
DIAL() 76
Dialing Functions - Alt D 16
Dialing Prefix #1 35
Dialing Prefix #2 35
Dialing Prefix #3 35
Dialing Prefixes 35
Dialing Status Window 23
Dialing Wait Time 34
Disclaimer and Warranty 5
Download Directory Path 37
Download Files - PgDn 53
Download Protocol Menu 51
Download/Upload Status Window 51
Edit Phone List Item Screen 17, 18
Editor Path\Filename 38
Exit MyComm - Alt X 48
EXIT() 74
Expand Blank Lines to Spaces 40
External Programs Path\Filename 38
External Protocol File Transfers 56
External Protocols Setup 43
External Protocols Setup Screen 43
F1 key 15, 48
F2 key 49
F3 key 49
F4 key 49
File Transfer Hints 53
FILEHERE() 76
Filename Guessing 47
Find Phone List Items 25
General System Requirements 6
GOSUB() 74
GOTO() 69
Guess Filename 47
Guess Up/Download Filename 47
Hang Up Modem - Alt H 26
HANGUP() 73
Help Menu - F1 15
Help Screen 15
Help Screen - F1 48
High speed modem 32
IF() 75
IFFLAG() 70
IFSCAN() 70
Ignore Carrier Detect 73
IGNORECD() 73
INCFLAG() 70
Installation 8, 9
Introduction to MyComm 1
Join Script 12
Join Script - Alt J 27
JUMPSCP() 76
KBDFLSH() 76
Kermit File Transfers 56
Kermit Transfers Setup 42
LF Translation Upload and Download 40
Line Editing Functions 59
Line Pace Time 40
Load Phone List Screen 25
Local Echo 21
Local Echo on by Default 34
Local Echo On During ASCII Uploads 40
Local Echo On/Off - Alt E 26
LOCLECHO() 75
Logon Name 20
Make Noise After File Transfers 46
Make Noise When Calls Connect 46
Manual Dial - Alt M 28
Manual Dial Screen 24
Manual Dial Window 24
Mark Phone List Items 24
Miscellaneous Options Setup 44
Miscellaneous Options Setup Screen 45
Modem Answer String 33
Modem Attention String 33
Modem Cancel Dial String 33
Modem Dial Suffix String 33
Modem Hang Up String 33
Modem Initialization String 32
Modem Setup Screen 31
Move Phone List Item 25
MyComm as a Host 56
MyComm Bug Report Form 80
MyComm Command Summary 58
MyComm Files 7
MyComm Installation 8
MyComm Line Editing Functions 59
MyComm Order Form 79
MyComm Registration and Licensing 2
MyComm Revision History 82
MyComm Screens and Menus 13
Name 18
Number 18
Order Form 79
Outside to DOS - Alt O 28
Pacing Char 41
Page Down 53
Page Up 53
Password 20
Password for sign on 46
Paths Setup 36
Paths Setup Screen 37
Pause Between Calls 34
PAUSE() 73
PgDn 53
PgUp 53
Phone File Path\File 38
Phone Item Info Screen 23, 24
Planned Modifications and Upgrades 81
PORTFLSH() 76
PORTGET() 76
Present Line Status - Alt L 27
Present Line Status Window 27
Print Phone List 26
Protocols Setup 38
Protocols Setup Menu 38
Quick Re-Dial - Alt Q 29
QUIT() 75
Received BS (BackSpace) Destructive 21
RECVFILE() 72
Remote Abort Char 39
Restore to Defaults 48
RETURN() 74
Revision History 82
Run External Program - Alt R 29
RUNDOS() 76
Save Changes 22
Save Setup 48
SCP Files 67
SCP_CHK.EXE 77
Screen Background Color 45
Screen Capture Path\File 37
Screen Text Color 45
Screens and Menus 13
Script - Dialing Entry 22
Script, creating 66
Script Labels 68
Script Language 66, 67
Script Sample 78
Script Syntax Checker 77
Scripts, Special Characters 68
Scroll Back - Alt K 28
SEAlink Derived File Transfers 54
Send Break - Alt B 16
Send Init. String Menu 27
Send Modem Initialization Strings - Alt I 26
Send Name - F2 49
Send Password - F3 49
Send Screen to File - Alt W 48
Send Tagline - F4 49
SENDFILE() 71
SENDNAME() 71
SENDPASS() 71
SESCAP() 76
Session Capture On/Off/Pause - Alt S 30
Session Capture Path\File 37
SETFLAG() 69
SETSTR() 74
SNDBREAK() 73
Sort Phone List 25
Starting a File Transfer 50
Stop Bits 19
Strip Hi Bits 21
Strip High Bits 39
System Requirements 8
Terminal Emulation - Alt T 30
Terminal Screen 14
Terminal Type 20
Time Format - 12 or 24 Hour 45
Timed Start 13
Transferring Files 49
Troubleshooting 63
TTY Terminal Emulation 60
Update Configuration - Alt U 30
Update Configuration Menu 31
Upload Directory Path 37
UpLoad Files - PgUp 53
Use CTS/RTS Flow Control 35
Use Direct Video 46
Use DSR/DTR Flow Control 35
Use DTR to Hang Up Modem 34
Use XON/XOFF Flow Control 35
VT-100 Terminal Emulation 61
VT-52 Terminal Emulation 61
WAITFOR() 69
XMIT() 69
Xmodem File Transfers 54
Xmodem-1K 54
Ymodem 54
Ymodem Batch - 1K 55
Ymodem Batch File Transfers 55
Ymodem-G Batch 55
Your Name for sign on 46
Zmodem 32 Bit CRC 41
Zmodem Auto Download Feature 41
Zmodem File Transfers 55
Zmodem Receive Crash Recovery 42
Zmodem Send Crash Recovery 41
Zmodem Transfers Setup 41
